I find it easier to understand in terms of the Unix syscall API. `2>&1` literally translates as `dup2(1, 2)`, and indeed that's exactly how it works. In the classic unix shells that's all that happens; in more modern shells there may be some additional internal bookkeeping to remember state. Understanding it as dup2 means it's easier to understand how successive redirections work, though you also have to know that redirection operators are executed left-to-right, and traditionally each operator was executed immediately as it was parsed, left-to-right. The pipe operator works similarly, though it's a combination of fork and dup'ing, with the command being forked off from the shell as a child before processing the remainder of the line.
Though, understanding it this way makes the direction of the angled bracket a little odd; at least for me it's more natural to understand dup2(2, 1) as 2<1, as in make fd 2 a duplicate of fd 1, but in terms of abstract I/O semantics that would be misleading.
Another fun consequence of this is that you can initialize otherwise-unset file descriptors this way:
$ cat foo.sh
#!/usr/bin/env bash
>&1 echo "will print on stdout"
>&2 echo "will print on stderr"
>&3 echo "will print on fd 3"
$ ./foo.sh 3>&1 1>/dev/null 2>/dev/null
will print on fd 3
It's a trick you can use if you've got a super chatty script or set of scripts, you want to silence or slurp up all of their output, but you still want to allow some mechanism for printing directly to the terminal.
The danger is that if you don't open it before running the script, you'll get an error:
$ ./foo.sh
will print on stdout
will print on stderr
./foo.sh: line 5: 3: Bad file descriptor
And just like dup2 allows you to duplicate into a brand new file descriptor, shells also allow you to specify bigger numbers so you aren’t restricted to 1 and 2. This can be useful for things like communication between different parts of the same shell script.
I know the underlying call, but I always see the redirect symbols as indicating that "everything" on the big side of the operator fits into a small bit of what is on the small side of the operator. Like a funnel for data. I don't know the origin, but I'm believing my fiction is right regardless. It makes <(...) make intuitive sense.
The comment about "why not &2>&1" is probably the best one on the page, with the answer essentially being that it would complicate the parser too much / add an unnecessary byte to scripts.
This is misleading because you use plural for both and I'm sure most of these UX missteps were _each_ made by a _single_ person, and there were >1 users even at the time.
You're not wrong, but there's fairly easy ways to deal with filenames containing spaces - usually just enclosing any variable use within double quotes will be sufficient. It's tricker to deal with filenames that contain things such as line breaks as that usually involves using null terminated filenames (null being the only character that is not allowed in filenames). e.g find . -type f -print0
Trying to be language agnostic: it should be as self-explanatory as possible. 2>&1 is all but.
Why is there a 2 on the left, when the numbers are usually on the right. What's the relationship between 2 and 1? Is the 2 for std err? Is that `&` to mean "reference"? The fact you only grok it if you know POSIX sys calls means it's far from self explanatory. And given the proportion of people that know POSIX sys calls among those that use Bash, I think it's a bit of an elitist syntax.
Is it more sane, or is it just what you are used to?
Python doesn't really have much that makes it a sensible choice for scripting.
Its got some basic data structures and a std-lib, but it comes at a non-trivial performance cost, a massive barrier to getting out of the single thread, and non-trivial overhead when managing downstream processes. It doesn't protect you from any runtime errors (no types, no compile checks). And I wouldn't call python in practice particularly portable...
Laughably, NodeJS is genuinely a better choice - while you don't get multithreading easily, at least you aren't trivially blocked on IO. NodeJS also has pretty great compatibility for portability; and can be easily compiled/transformed to get your types and compile checks if you want. I'd still rather avoid managing downstream processes with it - but at least you know your JSON parsing and manipulation is trivial.
Go is my goto when I'm reaching for more; but (ba)sh is king. You're scripting on the shell because you're mainly gluing other processes together, and this is what (ba)sh is designed to do. There is a learning curve, and there are footguns.
So if i happen to know the numbers of other file descriptors of the process (listed in /proc), i can redirect to other files opened in the current process? 2>&1234? Or is it restricted to 0/1/2 by the shell?
Would probably be hard to guess since the process may not have opened any file once it started.
It means redirect file descriptor 2 to the same destination as file descriptor 1.
Which actually means that an undelrying dup2 operation happens in this direction:
2 <- 1 // dup2(2, 1)
The file description at [1] is duplicated into [2], thereby [2] points to the same object. Anything written to stderr goes to the same device that stdout is sending to.
The notation follows I/O redirections: cmd > file actually means that a descriptor [n] is first created for the open file, and then that descriptor's decription is duplicated into [1]:
Humans used this combination extensively for decades too. I'm no aware of any other simple way to grep both stdout and stderr from a process. (grep, or save to file, or pipe in any other way).
"not humans" are using this extensively precisely because humans used this combination extensively for decades. It's muscle-memory for me. And so is it for LLMs.
I found the explanation useful, about "why" it is that way. I didn't realize the & before the 1 means to tell it is the filedescriptor 1 and not a file named 1.
Well sure, but surely this takes some inspiration from both `&` as the "address of" operator in C as well as the `>` operator which (apart from being the greater-than operator) very much implies "into" in many circumstances.
So `>&1` is "into the file descriptor pointed to by 1", and at the time any reasonable programmer would have known that fd 1 == STDOUT.
I've also found llms seem to love it when calling out to tools, I suppose for them having stderr interspersed messaged in their input doesn't make much difference
> I am thinking that they are using & like it is used in c style programming languages. As a pointer address-of operator. [...] 2>&1 would represent 'direct file 2 to the address of file 1'.
I had never made the connection of the & symbol in this context. I think I never really understood the operation before, treating it just as a magic incantation but reading this just made it click for me.
No, the shell author needed some way to distinguish file descriptor 1 from a file named "1" (note that 2>1 means to write stderr to the file named "1"), and '&' was one of the few available characters. It's not the address of anything.
To be consistent, it would be &2>&1, but that makes it more verbose than necessary and actually means something else -- the first & means that the command before it runs asynchronously.
As someone who use LLMs to generate, among others, Bash script I recommend shellcheck too. Shellcheck catches lots of things and shall really make your Bash scripts better. And if for whatever reason there's an idiom you use all the time that shellcheck doesn't like, you can simply configure shellcheck to ignore that one.
I enjoyed the commenter asking “Why did they pick such arcane stuff as this?” - I don’t think I touch more arcane stuff than shell, so asking why shell used something that is arcane relative to itself is to me arcane squared.
I love myself a little bit of C++. A good proprietary C++ codebase will remind you that people just want to be wizards, solving their key problem with a little bit of magic.
I've only ever been tricked into working on C++...
I always wondered if there ever was a standard stream for stdlog which seems useful, and comes up in various places but usually just as an alias to stderr
The point is that the order in which that is processed is not left to right.
First the | pipe is established as fd [1]. And then 2>&1 duplicates that pipe into [2]. I.e. right to left: opposite to left-to-right processing of redirections.
When you need to capture both standard error and standard output to a file, you must have them in this order:
bob > file 2>&1
It cannot be:
bob 2>&1 > file
Because then the 2>&1 redirection is performed first (and usually does nothing because stderr and stdout are already the same, pointing to your terminal). Then > file redirects only stdout.
But if you change > file to | process, then it's fine! process gets the combined error and regular output.
I understand how this works, but wouldn’t a more clear syntax be:
command &2>&1
Since the use of & signifies a file descriptor. I get what this ACTUALLY does is run command in the background and then run 2 sending its stout to stdout. That’s completely not obvious by the way.
Though, understanding it this way makes the direction of the angled bracket a little odd; at least for me it's more natural to understand dup2(2, 1) as 2<1, as in make fd 2 a duplicate of fd 1, but in terms of abstract I/O semantics that would be misleading.
The danger is that if you don't open it before running the script, you'll get an error:
Which is lost when using more modern or languages foreign to Unix.
open a terminal (OSX/Linux) and type:
open a browser window and search for: Both will bring up the man page for the function call.To get recursive, you can try:
(the unix is important, otherwise it gives you manly men)That's only just after midnight [1][2]
[1] - https://www.youtube.com/watch?v=XEjLoHdbVeE
[2] - https://unix.stackexchange.com/questions/405783/why-does-man...
The comment about "why not &2>&1" is probably the best one on the page, with the answer essentially being that it would complicate the parser too much / add an unnecessary byte to scripts.
File descriptors are like handing pointers to the users of your software. At least allow us to use names instead of numbers.
And sh/bash's syntax is so weird because the programmer at the time thought it was convenient to do it like that. Nobody ever asked a user.
Are you sure there wasn't >&1 users... Sorry I'll get my coat.
Which means that reading someone else's shell script (or awk, or perl, or regex) is INCREDIBLY inconvenient.
But my main reason is that most scripts break when you call them with filenames that contain spaces. And they break spectacularly.
What should be the syntax according to contemporary IT people? JSON? YAML? Or just LLM prompt?
Why is there a 2 on the left, when the numbers are usually on the right. What's the relationship between 2 and 1? Is the 2 for std err? Is that `&` to mean "reference"? The fact you only grok it if you know POSIX sys calls means it's far from self explanatory. And given the proportion of people that know POSIX sys calls among those that use Bash, I think it's a bit of an elitist syntax.
Python doesn't really have much that makes it a sensible choice for scripting.
Its got some basic data structures and a std-lib, but it comes at a non-trivial performance cost, a massive barrier to getting out of the single thread, and non-trivial overhead when managing downstream processes. It doesn't protect you from any runtime errors (no types, no compile checks). And I wouldn't call python in practice particularly portable...
Laughably, NodeJS is genuinely a better choice - while you don't get multithreading easily, at least you aren't trivially blocked on IO. NodeJS also has pretty great compatibility for portability; and can be easily compiled/transformed to get your types and compile checks if you want. I'd still rather avoid managing downstream processes with it - but at least you know your JSON parsing and manipulation is trivial.
Go is my goto when I'm reaching for more; but (ba)sh is king. You're scripting on the shell because you're mainly gluing other processes together, and this is what (ba)sh is designed to do. There is a learning curve, and there are footguns.
Would probably be hard to guess since the process may not have opened any file once it started.
Which actually means that an undelrying dup2 operation happens in this direction:
The file description at [1] is duplicated into [2], thereby [2] points to the same object. Anything written to stderr goes to the same device that stdout is sending to.The notation follows I/O redirections: cmd > file actually means that a descriptor [n] is first created for the open file, and then that descriptor's decription is duplicated into [1]:
It redirects STDERR (2) to where STDOUT is piped already (&1). Good for dealing with random CLI tools if you're not a human.
So `>&1` is "into the file descriptor pointed to by 1", and at the time any reasonable programmer would have known that fd 1 == STDOUT.
I had never made the connection of the & symbol in this context. I think I never really understood the operation before, treating it just as a magic incantation but reading this just made it click for me.
To be consistent, it would be &2>&1, but that makes it more verbose than necessary and actually means something else -- the first & means that the command before it runs asynchronously.
Thus you cannot write:
You also cannot write However you may write The n>& is one clump.It's very, very easy to get shell scripts wrong; for instance the location of the file redirect operator in a pipeline is easy to get wrong.
I've only ever been tricked into working on C++...
But also | isnt a redirection, it takes stdout and pipes it to another program.
So, if you want stderr to go to stdout, so you can pipe it, you need to do it in order.
bob 2>&1 | prog
You usually dont want to do this though.
First the | pipe is established as fd [1]. And then 2>&1 duplicates that pipe into [2]. I.e. right to left: opposite to left-to-right processing of redirections.
When you need to capture both standard error and standard output to a file, you must have them in this order:
It cannot be: Because then the 2>&1 redirection is performed first (and usually does nothing because stderr and stdout are already the same, pointing to your terminal). Then > file redirects only stdout.But if you change > file to | process, then it's fine! process gets the combined error and regular output.
[0] https://stackoverflow.com/questions/3618078/pipe-only-stderr...
command &2>&1
Since the use of & signifies a file descriptor. I get what this ACTUALLY does is run command in the background and then run 2 sending its stout to stdout. That’s completely not obvious by the way.
command &stderr>&stdout