What RISC-V extensions is this built for? There is a target triple of riscv64-unknown-linux-gnu listed so i assume the baseline RV64GC that the Linux kernel is built against.
It makes sense to be conservative with a new architecture but new high performance RISC-V cores such as from SiFive[1] are going to meet RVA23. That standard has vector and bit manipulation extensions that could be used to improve performance with a python interpreter. I guess more testing needs to be done to see if raising the bar is useful.
It’s not like GC isn’t a massive part of RVA23 - those are the basic instructions that handle 80-90% of all uses (including most of what CPython needs).
I’m sure one could do some optimizations on RVA23, but is it really worth it?
We (CPython) currently only have access to RV64GC machines to test on, and so that is the defacto target we can currently support.
Personally, I hope to see RVA23 become the baseline in the future. But that will depend on adoption.
On the packaging side of things, the platform tag is manylinux_X_Y_riscv64. So far that has meant RV64GC. So before we set a baseline of RVA23, we will need to see where the community lands.
For example x86_64 has v1, v2, v3 and v4 baselines, this tells you which instructions they support (e.g. v4 has AVX-512, v3 has AVX2, etc.).
RISC-V RVA22 and RVA23 aren't too different in this regard. Each one prescribes which extensions must be supported by the processor. I saw RV64GC mentioned, this is just a shortening of RV64IMAFDC, so I for baseline instructions, M for multiplication and division, A for atomic, F for floating point, D for double precision floating point and C for compressed instructions.
You can have a baseline E profile instead of I (less registers, some other features stripped), but I don't think we will ever see manufactured RV64E core, trough RV32EC cores exist.
That's plausible. The bigger constraint to defaulting to RVA23 is that users are running on, and building all of their wheels targetting, RV64GC. So unless our users adopt RVA23, it would be unwise to switch.
I wonder how much this matters for python.
As long as the important dependencies like numpy runtime dispatch RVV, it should probably be fine.
Zba would probably give a small boost. Zbb gives a substantial boost to perf for applications that use clz/popc heavily, but I don't think that would apply to python.
People bring this up to every RISC-V discussion but the same could be said for ARM or x86. For which ARM instruction set is built? Does this ARM cpu support integer division instructions, does support arm and thumb instruction encoding, only arm, only thumb, does it have a floating point unit, does it have neon, does it have MMU. Those are still relevant questions for ARM cores.
On x86 situation is even crazier https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html . Some of the more recent CPUs list ~60 optional features. Even if you look just at generic common profiles you have i386, i486, i586, i686, x86-64, x86-64-v2, x86-64-v3, x86-64-v4. Just a single family of vector instructions has 6 different versions for example: SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2. I am not even going to try counting all the variations and optional instructions of AVX512.
On one hand this is an important topic, especially in contexts like which X86-64 profile are the software in Linux distro official repositories targeting.
At the same time no one is bothered by 20 cent ARM mcu not having instructions for atomic memory access, supervisor, SIMD or even floating point.
So if anything RISC-V instruction set optional feature sets are probably better structured and less fragmented (for now) than the current situation with ARM and x86.
Micropython runs on tons of stuff and while it isnt capital-P Python, its close enough for doing a wide variety of embedded work without learning a new language/libraries/etc.
If you'd limit yourself to cores implementing the Application profile of ARM (Armv8-A etc), you'd do the same and limit yourself to cores implementing the Application profile of RISC-V (RVA23 etc). In that case, you can assume vector instructions and everything else.
If you don't, you get the exact same kind of question with ARM as with RISC-V. Do you use NEON or with SVE? Or do you conservatively compile without vector instructions at all even though it could possibly result in speed-ups for some loops?
The same problem exists for x86. Is $program built for x86-64 with SSE2? AVX2? AVX512? (I chose those three because they are programmer-visible. Programmers have to use intrinsics to exploit those ISA extensions effectively.)
For RISC-V the questions to ask are similar: Is this built for RVA20? Or RVA23? (The big feature of RVA23 is the Vector extension, again something that is programmer-visible)
Embedded RISC-V programmers will have to ask a lot more questions. But for most programmers the whole fragmentation thing is simply a giant meme repeated ad nauseam.
Intel has done such a good job keeping AVX512 support away from reaching ubiquitous adoption, it's insane. There are so many useful instructions in AVX512 which are just missing from AVX/AVX2 that you can't assume exist, even on modern CPUs, because Intel can't get their shit together.
The core problem was tying instructions to bit width. But I'm actually surprised that they didn't add AVX512 support through double pumped 256-bit operations like AMD did for a while.
One could always build libraries which people can use if they need the more high-performance cores. There is not much in the CPython core that will benefit though.
CPython is written in C, did running it on Risc-V take more than a recompilation? Were there any surprises? Yes of course it needs testing and RISC-V in the CI stack, but I'd expect fairly smooth sailing.
Yes, RISC-V usually compiles out of the box. They just need a new "milestone" so the corporations that hire the remaining mediocre core developers think they are doing something.
It's the same with WASI integration. Two Junta members already commit to that failed project in order to show presence and activity.
Odd they still have i686-pc-windows-msvc as Tier 1 *. Even Microsoft doesn't have any supported 32bit Windows versions anymore, and C extension modules likely follow Linux (where Python doesn't have any no supported i686 triplets in any tier). It would be more modern to demote its Tier and promote aarch64 Windows or wasm32 instead to Tier 1.
Python's tiering has to do with testability and availability thereof, not modernness. In the case of 32-bit Windows, the reason it's still testable is because Windows still ships a 32-bit userspace, even if Windows itself only supports x86-64.
(From personal experience, testing Windows aarch64 is a massive PITA, even on GitHub Actions, which all common sense would indicate should have the best aarch64 Windows CI runner story.)
Tier1: Windows x64/i686, Linux x64/ARM gcc, Darwin/ARM
Tier2: Linux x64/ARM w/ clang, Windows ARM, WASM, Darwin/x64
Tier3 is a pretty low support level, but tiers 1 and 2 is a pretty short list of major commercial platforms. Also even for developers to fix, availability of e.g. RiscV machines in the cloud to reproduce and fix on is still somewhat limited.
Looks like the most important step towards tier two is mostly about proving the CI infrastructure is reliable (which takes time at tier 3), and have at least two core developers committed to fixing any issues (within 24 hours)
How is Python a dead language due to ML when it's the lingua franca of AI/ML between pytorch, pandas, numpy, langchain, litellm, vLLM, and a whole bunch of other libraries?
It makes sense to be conservative with a new architecture but new high performance RISC-V cores such as from SiFive[1] are going to meet RVA23. That standard has vector and bit manipulation extensions that could be used to improve performance with a python interpreter. I guess more testing needs to be done to see if raising the bar is useful.
[1]https://www.sifive.com/cores/performance-p800
I’m sure one could do some optimizations on RVA23, but is it really worth it?
We (CPython) currently only have access to RV64GC machines to test on, and so that is the defacto target we can currently support.
Personally, I hope to see RVA23 become the baseline in the future. But that will depend on adoption.
On the packaging side of things, the platform tag is manylinux_X_Y_riscv64. So far that has meant RV64GC. So before we set a baseline of RVA23, we will need to see where the community lands.
RISC-V RVA22 and RVA23 aren't too different in this regard. Each one prescribes which extensions must be supported by the processor. I saw RV64GC mentioned, this is just a shortening of RV64IMAFDC, so I for baseline instructions, M for multiplication and division, A for atomic, F for floating point, D for double precision floating point and C for compressed instructions.
You can have a baseline E profile instead of I (less registers, some other features stripped), but I don't think we will ever see manufactured RV64E core, trough RV32EC cores exist.
Zba would probably give a small boost. Zbb gives a substantial boost to perf for applications that use clz/popc heavily, but I don't think that would apply to python.
On one hand this is an important topic, especially in contexts like which X86-64 profile are the software in Linux distro official repositories targeting.
At the same time no one is bothered by 20 cent ARM mcu not having instructions for atomic memory access, supervisor, SIMD or even floating point.
So if anything RISC-V instruction set optional feature sets are probably better structured and less fragmented (for now) than the current situation with ARM and x86.
If you don't, you get the exact same kind of question with ARM as with RISC-V. Do you use NEON or with SVE? Or do you conservatively compile without vector instructions at all even though it could possibly result in speed-ups for some loops?
For RISC-V the questions to ask are similar: Is this built for RVA20? Or RVA23? (The big feature of RVA23 is the Vector extension, again something that is programmer-visible)
Embedded RISC-V programmers will have to ask a lot more questions. But for most programmers the whole fragmentation thing is simply a giant meme repeated ad nauseam.
The core problem was tying instructions to bit width. But I'm actually surprised that they didn't add AVX512 support through double pumped 256-bit operations like AMD did for a while.
We've seen test failures like https://github.com/python/cpython/issues/151040
And perf support needs to be tested and merged https://github.com/python/cpython/issues/121201
Overall though, fairly smooth sailing as you say.
The reason RISC-V wasn't already supported is a mix of lacking hardware access for build bots and committers willing to pledge time to support it.
I don't understand the significance of this announcement in the submission.
It's the same with WASI integration. Two Junta members already commit to that failed project in order to show presence and activity.
It is a cancel and buzzword driven project.
* https://peps.python.org/pep-0011/#tier-1
(From personal experience, testing Windows aarch64 is a massive PITA, even on GitHub Actions, which all common sense would indicate should have the best aarch64 Windows CI runner story.)
That's significant, but tier 3 is still a caveat. Still allowed to break without blocking anything or being fixed as a priority.
Tier1: Windows x64/i686, Linux x64/ARM gcc, Darwin/ARM
Tier2: Linux x64/ARM w/ clang, Windows ARM, WASM, Darwin/x64
Tier3 is a pretty low support level, but tiers 1 and 2 is a pretty short list of major commercial platforms. Also even for developers to fix, availability of e.g. RiscV machines in the cloud to reproduce and fix on is still somewhat limited.
https://learn.microsoft.com/en-us/lifecycle/products/windows...
Looks like the most important step towards tier two is mostly about proving the CI infrastructure is reliable (which takes time at tier 3), and have at least two core developers committed to fixing any issues (within 24 hours)
https://www.sifive.com/development-platforms/sifive-bigsky-s...
Tier 3, or no support at all, seems an appropriate designation.
also Andes is public
https://docs.python.org/3/howto/free-threading-python.html