This is a really interesting and complete writeup.
I have been helping someone who has little experience with Windows or Mac, but used DOS for years ( until pretty recently ) and I've set them up with a simple Debian Linux running XFCE4 as the desktop. I've found that I have to teach them and also document a lot of basic computer idioms -- Control-C / X / A / V to copy, cut, select all, paste; but also more basic things, like the fact there are two pointers on the screen -- one for the mouse and one for the keyboard -- if you slide the mouse pointer to a specific point and press a keyboard key, the new key will not appear where the arrow is, it will appear where the text cursor is.
A big one was tabs. I had to get a couple of manilla folders and show them the actual tabs, and hold it up next to the browser with several tabs, and suddenly it snapped with them what the interface was trying to represent.
Control-A will select all of a web page, unless you are in the text entry box of a form, then it selects just the things in that text entry box.
I started writing this up in a little manual, it got to a dozen pages fast, and I haven't put very much in it.
If anyone knows of a place where some portion of all of this is written down, post a link !
A friend of mine used to give computer courses back in the 90s (to people that had never used a computer before).
At one point he said "You need to move the mouse up" and one of the participants actually lifted the mouse physically from the desk - which was perfectly correct for someone not being used to computers.
I always remember this when I think "isn't this obvious?" with regards to usage patterns on computers.
I remember that a lot of older folks had trouble understanding when to use a single click and when a double click. Clicking twice rapidly was also difficult for them, and they would consistently jerk the mouse and drag things around. Having every part of the interface in earlier windows draggable and reactive made this even more frustrating, since for them things would just disappear from the desktop.
During my M.Tech in Comp. Sci, I was requested to volunteer to be a lab assistant in a diploma course in programming in C for non-technical people. A Ph.D. in Philosophy was complaining that his program was not compiling. He wrote "exist(0)" instead of "exit(0)". I found this so interesting. Existentialism was on his mind, I guess. The program clearly exits by not existing any more? Can't argue with that!
I corrected him and went on my rounds. I remember that a bank manager was the best of the batch. By the time I circled back to my philosophy friend, he quietly changed "exit()" back to "exist()" and the program was not compiling again! This anecdote stayed in my mind.
"which was perfectly correct for someone not being used to computers."
I disagree.
Even someone with no experience with computers understands, generally speaking, that the mouse is tracking the surface of the desk somehow. I have had this conversation many times (or did, back in the 1990s when mice were more novel for most people). Nobody picked it up.
The ones who do in these anecdotes are, IMO, examples of the sort of people who absolutely shut their brains off in protest when asked to work with new tech. I have been blessed in that I have only very, very rarely been asked to work with or even know such people.
> if you slide the mouse pointer to a specific point and press a keyboard key, the new key will not appear where the arrow is, it will appear where the text cursor is.
Out of curiosity: were they unfamiliar with the mouse, or were there programs that used a single cursor for both the keyboard and mouse? (I am aware that many text mode programs used a block for both cursors, but haven't seen a program where the two functions were combined.)
In the obscure ui choices department, I am that weirdo who uses openbsd as a desktop system, At one point not thinking I did ctrl+a in a firefox textentry and much to my surprise it did the right thing and moved the cursor to the beginning of the line.
I had no idea using unix vs windows cursor movement was even an option, because linux never picks the correct method, Still have no clue how it is set(a gtk option? but qt apps are set the same.) But salutes to whatever obsd porter picked it, really made my day.
macOS supports emacs-like bindings natively: Ctrl-A/Ctrl-E for line start/end, Ctrl-K to kill, Ctrl-Y to yank, Ctrl-F/Ctrl-B for forward/back, etc.
They are defined in /System/Library/Frameworks/AppKit.framework/Resources/StandardKeyBinding.dict. You can create ~/Library/KeyBindings/DefaultKeyBinding.dict to augment or override those.
Anything built on AppKit that uses the standard text system (NSTextView, NSTextField, and the field editors that back them) supports those bindings “for free”.
For non-native apps, Karabiner Elements⁽¹⁾ is the answer, using a config like this⁽²⁾.
I have it enabled but it can be very confusing: depending on whether you're in a text field or not, in say a browser, ^W will mean delete word or close tab. And sure enough closing a tab will sometimes but not always focus the URL box of the previous tab.
There used to be an obscure internal GTK setting to properly separate control plane from command plane like on (then named) Mac OS X but IIRC it's long gone / hardcoded to only GTK on macOS.
EDIT: Found it, GTK up to 3 had proper <Primary> vs <Control>. In what I would consider to be a fatal regression, GTK 4 just aliases <Control> and <Primary>, leaving the apps to do the work.
Ctrl+a to carriage return the cursor seems work universally everywhere on a Mac. It even works on Microsoft products, incredible coming from the company that poorly reinvents everything and completely disrespects the default behaviors.
I always find this curious, is readline implemented at the hardware level or something? There’s just no effing way that was a priority ticket on Microsoft Teams given all the obnoxious weirdness of their chat text field.
And bizarrely, ctrl+k, ctrl+w, and ctrl+e are more seldom. Maybe 50-50 chance for those. But trusty ctrl+a is always there.
To me Ctrl+A was always "Select All", and it worked reliably on every system I had (except once when at my office I had a computer with unix bindings and the administrator told me he can't change them so I only used my laptop).
I have been using Linux / GNOME as my primary environment for the last 20 years, but at my current job, that was not an option, so I'm on macOS.
I tried for a week to get used to the unfamiliar key bindings for text input, but then I gave up—I'm a vim user after all!—and found a system setting to use the bindings I am more familiar with. This was picked up by many applications, but notably _not_ by the Microsoft suite, which appears to have the default macOS bindings hard coded...
Another surprise was discovering that Ctrl-J adds a newline in Claude Code. I'm fairly certain this is a feature of the environment, not CC, but it works everywhere I've tried it. KDE Konsole on Debian.
I don’t have any resources but this is fascinating to read about, thanks for sharing! So many things we just assume make sense which really don’t.
Their misunderstanding of not being able to hover their cursor over something and interact using the keyboard honestly has me wondering why I thought the real way was intuitive, their logic there makes sense
Well, not really DOS, but company where I did migration (15+ years ago) from 4GL and AIX to Linux and Aubit 4GL did exactly that. They all used HyperTerminal (after me, putty) to connect and start all sorts of apps, think, SQL AND UI at the same time, terminal apps, with keyboard shortcuts that MUST be exactly the same, otherwise you would have mutiny.
They are sold a few years ago, new owner just needs a good (and huge) location in the city, if they continued, nothing would change for people working there. They saw Windows as something just for minesweeper and solitaire, nothing else.
> Who the heck has been using DOS (!?) until "pretty recently"? On what machine?
Not "DOS" in the classical sense, but a good corporate travel agent will probably spend the majority of their day in Amadeus or Sabre on a terminal emulator app - and be much, MUCH faster than clicking around in web portals.
Yes I don't disagree... Up to not long ago I knew employees at at least one bank still having one DOS app to navigate between customers' bank accounts (with all the family links / various accounts) and it was fast and quick.
But that's quite different from "someone using only DOS up to only 2026".
> and Macs offer ⌘ Command, ⌥ Option, ⌃ Control, and ⇧ Shift
This is traumatizing for me. I tried to switch to a mac for home use and failed because of keyboard handling. Using Polish diacritics (made with right alt) wasn't obvious at first. I was able to switch keyboard settings to mimic Linux/Windows, but it's just not there. Control and Command confusion haunts me. I dropped the platform because of this and know a few people who stayed on iphones, but also dropped Macs because of keyboard.
I once tried to "find myself" on linkedin search bar on someone else's Mac. I though "I got this, I'm a mac user now!" and managed to close the browser tab and open some random programs...
I admire people who jump between those platforms. Even more for languages that don't have standardized alphabet mappings, like Bulgarian (it seems they don't have consensus there).
It took me about 1 month of pain to convert. But now I find cmd far more logical than ctrl. Ctrl asks you to give up a pinky, a home key finger, to execute common chords - far more critical than a thumb, which is already designated for space and chord/modifier keys anyway, on both Windows or Mac. As a result, Windows requires two hands or awkward movement to hit something like ctrl-a, ctrl-z, ctrl-q, etc. The equivalent on Mac can all be one-handed.
Hate this. The Apple magic keyboard is my favourite keyboard (least amount of travel/force, for speed and to be easy on my hands/wrists), and I'm paying a yearly license for a software (magic utilities) to remap the keys properly on windows. On a Mac, forget about remapping them, it doesn't work.
This is exactly the kind of software you could consider vibe coding. I think there are also free apps like Karabiner-Elements, though maybe not as polished.
Same experience for me. I've ended up using Karabiner-Elements. With less than 10 rules (half of which are only for the browser), you can replicate the Windows layout on your Mac, it makes everything much easier.
This is for a Macbook Neo, your mileage may vary: fn (globe) -> left_command gives you a Windows-like Ctrl key for most of your keyboard shortcuts. This works way better than changing it in the macOS settings.
You can then left_command -> right_option, then use that "right_option" key in Raycast (to get PowerToys Command Palette fonctionality) and in AltTab (Windows-like multitasking).
If you use Raycast, you can easily assign the Windows key+. to emojis and Windows key+V to the clipboard history, like on Windows. If you don't, you can also do it with the system tools in Karabiner.
Moving between words was probably the thing that frustrated me the most, because on Mac it uses Option instead of Command, for some reason. Cmd+Left/Right -> Option+Left/Right gives you Windows-like word jump. Cmd+Backspace -> Option+Backspace allows you to remove a word using the Ctrl+Backspace keys, like on Windows. Same thing with Cmd+DeleteForward -> Option+DeleteForward. Unlike DefaultKeyBinding.dict modifications, which people online tend to suggest, it works in all apps (including Electron ones).
In my Chromium browser (Edge), I like to remap Cmd+H -> Cmd+Y (history), Cmd+J -> Cmd+Option+L (downloads), and Cmd+Tab -> Ctrl+Tab (tab switching). I'm not sure why Chromium uses such vastly different shortcuts on the two platforms.
For the latter, that only apply when your browser is open, I suggest creating the "Complex Modifications" rules using AI, because formatting can be tricky.
Once set up, it's easy to transfer rules between computers by exporting your settings in Karabiner, so you only have to do it once.
I still think that, if you're switching permanently, it would be better to relearn everything, because these patches can make it confusing to learn new shortcuts. But it's been a lifesaver for me, since I switch between Windows and Mac every day.
In a similar boat. I quickly remapped the Mac keyboard to work as close as possible to a Win one, and it helped. But it's a leaky abstraction. And now, as some of the modifier keys are swapped, it's always confusing when I see a shortcut in a menu, never sure what to press. So I'm using fewer shortcuts than on a Win.
So, for those who are 100% transitioning to Mac, my suggestion is to bite the bullet and adopt the Mac way. But for those who still live in both worlds (like me), I don't have a good answer, just that it's a constant struggle even after few years.
I tried to keep the keys mostly the same but the one I could never get used to was command + c/v/f/etc. It's just too awkward a combo for fingers. Using pinky for control on the left was much better ergonomics. So I swapped control and command keys.
I’ve done the exact same thing. I remember switching to Mac 20 years ago and the very first time I contorted my hand to use the copy shortcut and thinking…lol nope.
I had the same issue when I first started using a Mac decades ago (coming from being a Linux and Windows user), would get confused with Cmd and default to Ctrl, not understanding how to use diacritics, etc. A few weeks to a couple of months later and it was fine.
Nowadays I very much miss macOS diacritics shortcuts when using Windows, I only have a Windows PC for games with a Swedish/English keyboard but need to write in Portuguese sometimes, I have no idea how to use diacritics on Win11 while my keyboard is set to English, and much prefer the macOS way with Option + [N | E | I | C] (for ˜, ´, ˆ, ç) using any keyboard language, it just works. On Windows I need to change the whole keyboard language to be able to access diacritics easily, no shortcuts such as those.
Yea, having trained my muscle memory for at least 10 years on macs, my daily driver desktop is finally a modern Linux distro, and I'm having the most trouble with un-learning the ⌘ shortcuts. On Linux, sometimes "copy/paste" is CTRL-C/V, sometimes it's SHIFT-CTRL-C/V (meaning I need to position my pinky AND ring finger like I'm playing guitar or something). In terminals it's never CTRL-C/V, and once in a while there is an application where it's something bonkers. I kind of miss the universal ⌘ shortcuts that the entire macOS system and all 3rd party apps followed.
I distinctly remember using Microsoft Keyboard Layout Creator way back to replicate Mac way of entering some typographically correct punctuation on top of Polish layout. You could make your own custom layout as well.
However, when I still used Windows 11, I remember there being a variant of US keyboard layout built into the system that included Mac-like way of entering international diacritics. I no longer have access to a machine with Windows, but a quick Google search suggests United States – International might be what you're looking for.
It's definitely a matter of what you're familiar with. As a Linux user I'm able to use the "Compose Character" key (I map the right-hand Ctrl key to it) and then use that to write diacritics just as I used to in my university computer lab in the '90s on DEC VT220 terminals!
It's quite a good system: you press compose-character and then two letters to be combined. E.g. CC/o/" gives ö and CC/a/o gives å and so on. If you don't know the exact combination, you can usually guess within one or two attempts e.g. just now trying to get ç I guessed CC/c/s (š) and then CC/c/c (č) before getting it right with CC/c/,
Apropos of Swedish keyboards, though, when a Mac is inflicted on me, the horrible contortions necessary to get all the usual programming bracket symbols ({[]}) are infuriating. They're a lot less annoying on a Swedish PC keyboard.
I used a Mac for a long time, but since Polish uses diacritics heavily, the default position of Option was just terrible for touch typing. I have always simply swapped Option and Command because of that. That was always there in the system's keyboard settings, so no extra tools were needed.
It was only when I moved to overriding CapsLock that I installed Karabiner.
That's not too different from macOS's approach, instead of compose-character you learn the shortcuts for composing with the diacritics or special characters. After I learnt them it has always been quite efficient, I can write in Swedish or Portuguese without thinking.
Just curious why compose-character combo for å is a/o though, it would make more sense to me to be a/a.
> Apropos of Swedish keyboards, though, when a Mac is inflicted on me, the horrible contortions necessary to get all the usual programming bracket symbols ({[]}) are infuriating.
Absolutely agree, I never use the Swedish software layout even on keyboards which are physically using a Swedish layout, it's maddening finding the {[]}-_+=@ chars...
Yep, but I think it's intended to be a visual mnemonic. å looks like a tiny 'o' over the top of an 'a' even though that's not the letter combination it originated with.
> it's maddening finding the {[]}-_+=@ chars...
The series of RSI inducing vulcan neck pinches required to write C-like languages on a Nordic Mac layout drives me a bit mad, but I do have it in my body memory now when needs must!
I toy with the idea of designing my own 40%-ish keyboard just so I only have myself to blame for bad layout :)
I have been using Mac since 2018 daily on my day job and I still get confused by the symbols. I wish there was some system option to always display them as words or abbreviations (CMD etc) instead.
But I did get used to the navigation and basic shortcuts after a while. Using the terminal/keyboard/IDE shortcuts (which I can set up myself) for most of the work helps a lot.
Finder has its whole set of keyboard navigation shortcuts, like command + up arrow to go to parent, command + down arrow to open, ⌘3 for column view, ⌘⇧D for desktop, ⌘⇧H for home, ⌘⇧G for "go to"… I am very fond of the Finder’s navigation and as a long-time Mac user it still feels pretty clunky to try and get around on Windows. Both Windows and Mac are getting worse but it seems like Microsoft is making it worse faster, with OneDrive.
A lot of the Finder shortcuts work in the save / open dialogs in apps, although they broke some of the ergonomics of those dialogs years back.
They're written underneath the symbols on most (all?) Mac keyboards. At the very least, it's that way on my current MacBook, and my previous. I think they're also written on the magic keyboard I have as well.
That's not a developer friendly keyboard. For menu years I'm using Dejan Vesic's keyboard on PC where programming symbols are used as primary and you get ex-yu šć latin chars via AltGr. Works great if you're 90% coding, and occassionaly write something in native language. If you have to type more, you switch the keyboard to "non-programming" layout. I tried to bring this mapping to Mac, but with limited success - I could map AltGr to right "option" key, so not to the closest button to the space ("Command"). When I switch Mac/PC there's some time to readjust muscle memory.
If you've ever made the jump from PC to Mac (or vice versa) at work or home, you're painfully aware that there are very real costs of switching platforms in terms of lost knowledge and productivity. In addition to flushing years of accumulated knowledge down the toilet — goodbye Outlook-Teams-OneDrive-SharePoint-Excel-Word-PowerPoint-VBA, hello GMail-Workspace-GDrive-Sheets-Docs-Slides — there's also the matter of a thousand UI and other "paper cuts" to contend with ("Why are you looking for a 'prt sc' key," condescendingly replies a Mac aficionado in response to a question from a former Windows user, "when Shift+Command+3 is so intuitive?").
Linux for home. Mac for work. At least once a night I try to jump to the address bar in Firefox and accidentally lock the screen instead (win/cmd-L).
The Mac boosters here would be hilariously quaint if it wasn't so frustrating. Docker images that only work on macOS Docker and break on regular Linux. Quips like "Mac is so much more reliable, just use a Mac for Docker!" that I think are genuine opinion rather than a smug joke.
Between this, AI, and all the other brain rot trends, working in tech is so depressing these days.
> If you've ever made the jump from PC to Mac (or vice versa) at work or home
I make this "jump" about 20 times per day. I have iOS, MacOS and 2 windows machines at the moment. Very frequently I will RDP into the windows machines from the MacBook.
I've used a Windows PC my entire life. 35 years of PC.
I use my MBP M2 Pro when I travel, and for about 6 weeks every summer, and it's like pouring lemon juice into a paper cut the entire time.
Specifically, my concerns are around this exact matter: I have such muscle memory attached to, say, slamming my pinky across L-Ctrl+L-Shift+left arrow in order to quickly select just the previous word from the cursor.
This is something I do... I don't know, at least once a paragraph, as I very very quickly type and then realize I've introduced some basic typo that I need to nuke the previous word to address.
Doing this on Mac keyboards is Shift + Option + Left Arrow and... it's hell. It's absolute hell. Mashing that extreme corner shortcut with my pinkie is so baked in that there's just... no reasonable way for me to reprogram my brain to do that on a Mac.
Similarly, I have a stroke every time I try to mentally remap what things use control and what uses command. And while I could potentially remap the fn key on an MBP keyboard, I tend to use my Logitech K800 on both systems, so instead try to remap control to ALSO be command to basically get me as close to muscle memory as possible for things that need the command + shift. Since control is relatively rarely used, I think I just remapped it to caps lock. Though boy does that screw me in tmux.
Either way, when I'm typing extremely fast, being able to reliably navigate the caret and jumping around words, whole lines, etc. is just something I simply cannot get anywhere close to on a Mac and I die a tiny death every time I try.
This is a bit exaggerated... It's not really painful. I worked in a newspaper. The whole designers department moved to PCs when OS10 (a.k.a. OSX) came out. This also coincided with moving from QuarkXPress to InDesign.
Some nice things had been lost, some nice things had been found. Maybe it's also because OSX was also somewhat of a downgrade from OS8/OS9 in terms of user experience. Especially, Finder became a lot worse. So, people didn't feel very motivated to upgrade, and it made the switch easier... But, overall, there was very little struggle, the time we'd spend setting up the newspaper / magazine for print didn't really change.
Well... now, when I think about it, most of us used PCs at home. So, maybe it's not a fair comparison. But, even people who had Macs as their home / personal computers didn't seem to have any issue with the switch.
I think, some people kept the keyboards that came with G3/G4 (the clear heavy plastic ones with black key caps). They could be used with PCs. People didn't keep them to preserve the Mac-style layout (it wouldn't work anyways iirc), they just liked the quality of the physical product and accepted that some keys won't work the same way they did on a Mac.
Even though you could connect Mac mouse to a PC, I don't think anyone used that.
The delete key thing comes from how Windows descends from DOS which always had the cursor ON a character (blinking box kind of thing) whereas the Mac had the cursor as a thin line BETWEEN characters.
Technically DOS could have had "backspace" (delete the character BEFORE the cursor), "delete" (delete the character on/under the cursor), and "forward delete" (delete the next character AFTER the cursor).
I love that on macOS all in-app shortcuts are consistently Command+Something, like Q for Quit, W to close a window, and Control is usually for system-wide shortcuts, and Shift/Alt/Option is exactly what it says on the tin: modifiers for alternative behavior. You usually won't see Alt/Option on its own for any shortcut..
..while Windows is all over the place. Like why the heck is Alt+F4 used for quitting an app?? What does 4 stand for here? Death in Japanese and Chinese!?
> I love that on macOS all in-app shortcuts are consistently Command+Something, like Q for Quit, W to close a window
Yeah consistency is great, similarly cmd+t closes a tab, wait cmd+w closes a tab not a window. and cmd+w in vlc does not close vlc, cmd+w in finder does close the window.
CUA is a union of Mac like mnemonic command keys on Ctrl plus another set (from IBM/Motif perhaps) that use shift+insert,delete etc.
Alt+F4 through Alt+F9 are for Window Menu operations, like minimize, max. etc. Some besides Alt+F4:Close still work on older window managers, I remember SGI supported all of them.
Newer ones tend to hide or even disable the whole menu!
Even Windows as it is further lobotomized.
Apple commands are not always Command+Something. Go ahead, try to reopen the last closed tab on anything you're using, with the keyboard. Whooops, you pressed three keys. Also try to take a partial screen shot or record the screen. Hey, buddy, what the heck? Why did you press 4 and 5? What do 4 and 5 even mean?
Same reason your main drive in Windows is "C:" - history.
The command-shift shortcuts (function keys as they were called) were added in the 80's as such:
Command-Shift-1: Eject internal floppy
Command-Shift-2: Eject external floppy
Command-Shift-3: Take screenshot
In the System 7 era in the mid-90's, Command-Shift-4 to select an area to take a screenshot of was added.
Back then you could also install FKEY code resources into the system file to add custom ones, there was a small ecosystem of freeware/shareware function keys with useful shortcuts people would install.
You really didn't have to create a new account to say all that
> not always Command+Something. Go ahead, try to reopen the last closed tab on anything you're using, with the keyboard. Whooops, you pressed three keys.
Not always JUST Command duh. It still includes Command champ; the rest are modifiers.
I mean just ask any AI to list out all the common shortcuts for macOS and for Windows, then see which is more consistent.
> partial screen shot or record the screen ... Why did you press 4 and 5? What do 4 and 5 even mean?
4 alludes to the 4 corners of a rectangle, and 5 includes the time dimension, of course :)
I'm not an Apple person at all, but this is one of the hills I die on. The "Enter" key is for entering data, submitting a field, etc. The "Return" key is for returning the carriage, i.e. starting a new line. Importantly, those two are different functions! The only keys that exist twice on the keyboard are modifier keys (Ctrl, Shift, sometimes Super and Alt). The Return or Enter keys do not need to exist twice. Clearly these are meant to be two different functions, because they are two different keys on the keyboard.
To my wife's annoyance, I teach my children the correct names for these keys.
I know, and the Return key both returns the carriage and feeds the paper forward a line on teletypes. Hence the symbol ⏎, indicating "down and to the left" (for LTR languages.)
The symbol is a bit awkward in conjunction with the name "Carriage Return" though, because the Carriage returns to the right. (assuming left-to-right writing)
You know I have literally never noticed that, but you're right. The carriage slides over to the right, leaving the levels to hit the left side of the paper.
I have a delightful image in my mind of you explaining to the kids over breakfast the nuances of enter and return, and how Steven Jobs should burn in hell for confusing generations of Mac users.
> The only keys that exist twice on the keyboard are...
I wouldn't take "the standard 104 keyboard layout" as a respectable design.
- If the modifier keys exist twice, then why aren't they placed symmetrically?
- Most users use a mouse with the right hand; yet the numpad is placed on the right side of the keyboard (which means it's even further away). e.g. placing keyboard in front of you in the screen then means the mouse needs to be way off centre.
- That the letters remain asymmetrical shows adherence to tradition/familiarity over improving a good design.
- The spacebar doesn't need to be >6x the size of other keys.
- Caps Lock can be useful but isn't significant enough to be worth putting where it is.
I mean. I can agree with distinguishing "Return" and "Enter". But I wouldn't refer to the typical keyboard layout as if it's a well thought out design.
The arrows on newer keyboards are gone. Now it's just text. I wonder if that changes anything because Enter doesn't really sit well with the arrow next to it as entering data need not necessarily cause a carriage return.
Asahi and GNOME teams, please take this as an guide to implement ”Mac input compatibility mode”!
Dual booting between a MacOS and Linux is a painful process of manual keyboard and shorcut overrides to get the linux side somewhat to the (better) mac way of doing this.
Omarchy does a pretty good job of this. Super+C, Super+V works everywhere, even the terminal in a consistent way. But there are exceptions to super acting like MacOS command, like if you want to select all, then copy you have to do the Ctrl+A, Super+C jujitsu.
What always trips me about the German QWERTZ layout.. I am used to Mac keyboards.
When I want to type an @ on a Windows machine, I accidentally press Windows-L and lock it. For Windows users, when they use a Mac, they might be tempted to press AltGr-Q, which quits the foreground application.
When I switched from Win to Mac 20+ years ago I immediately noticed how much more ergonomic cmd-C was versus ctrl-C… for the latter the thumb has to fold under the palm of hand.
Not even mentioning the general well thought out and more logical key-combinations.
The strangest key for the switch was return for file rename… I now miss it on every other system that hasn't mapped it like this.
Prefer the positioning of cmd so much I flash all my keyboards firmwares on my windows and Linux machines to have ctrl beside space and super in the far corner.
Genuinely find it better ergonomically because it’s closer to where all the keys it’s pressed with are.
Far corner ctrl makes me use my pinky and splay my hand for it while beside space ctrl feels more natural for a thumb
I guess your ctrl-C experience depends on which fingers you use to press those buttons?
For me it's the other way around. cmd-C feels awkward to press and ctrl-c feels comfortable.
MacOS natively lets you remap the modifier keys, I have the Ctrl and Fn keys switched. It's input source dependent as well so I have it do this for the built-in keyboard only.
Interesting, that makes no sense to me. I assume you don't touch type.
If you touch type, you hold your 4 fingers on ASDF. If you want to press Ctrl+C, you move your pinky to Ctrl and press C with the index finger or middle finger.
On Macintosh, you have to hold your pinky much too close to the index finger to press Command+C which are very close.
If, instead, you use thumb and index that also puts the thumb in an awkward position because you have to cross the fingers (Command is to the left of C)
That's how it is by default but doesn't approximately everyone, when they first plug a non-Mac external keyboard into their Mac, immediately go to System Settings -> Keyboard -> Modifier keys and switch Command with Option?
Otherwise it would be really confusing when you switch from your external keyboard to the laptop keyboard.
Most newer keyboards I know have a toggle so the CMD and ALT switch in software. I had to switch from Mac to Win and Linux so often that I simply kept my CMD key where Super or Win is located and got used to it. Still sometimes weird when I use an actual Mac keyboard.
I do this as well as swap command/option on the built in keyboards. It works great for me switching between my own computers/OSes but always a second of re-calibration when I touch someone else's Macbook.
Logitech in particular do this. Their keyboards adapt to the OS so the keys are in the right place, not sure if this needs their drivers or not though.
> On a Mac, in simple input fields, ↑ and ↓ jumps to the beginning and end [...] Windows doesn’t have this convention
IIRC it worked for me on Windows (and Linux :-) as well!
I do prefer ⌘←→ as it’s more consistent. Also, ⌥←→ jumps one word back/forward on Mac, the Windows equivalient being ⌃←→.
> On Windows, [refresh is] typically F5, although some browsers now support Ctrl+R, too
Have always supported as far as I can remember :) F5 works on Mac in Firefox (and I think Chromium), but not in Safari.
> On both platforms, Fn+↑↓ does PgUp/ PgDn, and Fn+←→ does Home/End.
This will vary a lot depending on the manufacturer. ThinkPad T420 and other models from that era use those for media keys (which makes sense, they do have physical Home/End/PgUp/Dn keys).
---
Finally, a suggestion to fellow Linux users: try Mac keybindings, it’s amazing (especially if you’re e.g. running Asahi on a Macbook). Not all apps will be happy about this, but at least the KDE ones will generally follow the keybindings you set in the system settings.
And a weird tangent on deterministic, idempotent elevator buttons [1]:
> I always get a bit nervous when someone tells me that in their country, you can press the elevator button again to unset it.
The way I’ve seen this solved in a lot of countries across SEA is that you unset the elevator button by double-pressing it. It’s not intuitive, and I’ve only discovered it by accident, but it’s deterministic and idempotent: one gesture sets the button, the other unsets it.
> What Windows calls ⏎ Enter, Mac calls ⏎ Return. However, Macs also have an ⌤ Enter, although only on a numeric keypad
Just looked down on my windows keyboard and yes, the return key (the one above the right shift key) says "enter". That did not use to be the case. The return key used to say return and the tall key next to 3 and the numpad used to be the only enter key.
When did that change in PC land? I remember reading nerdy articles about the difference between return and enter.
The original IBM PC keyboard just used an arrow. The keyboard that shipped with the PC AT used Enter, while the enhanced keyboard (Model M) used an arrow for ISO layout keyboards, Enter for ANSI keyboards, and I think some variants for non-PC platforms used Field Exit, which was also used by IBM for many keyboards before the PC. I'm not sure what other vendors may have used, I'm sure there are some return keys out there, and for all I know IBM did ship keyboards with Return instead of Enter.
The word "enter" has now lost all meaning in my brain, but it does look a little weird on my keyboard. Never paid much attention in my 25+ years of computing.
Mac's German keyboard was always pain for writing code. This is less relevant today because most of the input has become natural language so no need for brackets and other non alphanumeric symbols (which are terribly painful key combinations on Mac German keyboards).
> What Windows calls ⏎ Enter, Mac calls ⏎ Return. However, Macs also have an ⌤ Enter, although only on a numeric keypad (previously, it was even there on laptops! [1]). On keyboards without the physical Enter key, you can simulate it via Fn+Return.
I have spent literally several minutes scanning this keyboard for a physical Enter (as opposed to Return) and have no idea what the author is talking about.
Really wish windows and Linux had the same 4 modifier system as Mac, always feels like ctrl is overloaded on Linux and alt wrongly used as a ctrl key in weird scenarios on windows (alt+F4)
ctrl-f4 is used in MDI applications to close one document window of a multi-document application. alt-f4 to close the whole application.
Well, I say "is used", but nothing in Windows is consistent anymore. Especially since web browsers started disrespecting the OS shortcuts. Now it seems like every application follows the web browser UI conventions instead of OS ones.
I'll take that if you move Fn completely out of they way, preferably far from the lower left corner. As a Windows+Mac user, I map it to <control> because it takes prime real estate and I rarely use it. I hate Fn, to be honest!
> Windows still supports Shift+Delete for cut, Ctrl+Insert for copy, and Shift+Insert for paste. I am not sure how many people use these.
So I grew up using DOS and these were pretty universal across edit/qbasic/word as well as many other third party apps. Not being able to Shift-Insert paste took my brain literally months to get used to when I switched to Mac like twenty years ago.
When I rarely find myself in Windows the muscle memory comes right back.
Personally the biggest problem (outside the Ctrl/cmd c/v conflict) is that as a UK ISO user, Macs botched the key on the top left, next to the 1.
I subsequently have to set my Mac keyboard layout to PC to fix backticks and remove that key that is never used, and rely on my touch typing.
It does also mean that no one will ever try to type on my laptop.
This irks me also, more than I'd normally admit. A couple of solutions I discovered over the years; one is to use `hidutil property --set` from the command line for UserKeymappings to overwrite the non us backslash to the backtick (I can't remember the specific codes for the keys, but you can find them online), however, this was cumbersome when occasionally using an external keyboard (I prefer ISO over ANSI) or if you restart the machine.
Eventually I settled on Karabiner Elements, an app that lets you create a simple modification specifically to target the Mac internal keyboard where you can map `non_us_backslash` (that strange unused key) to `grave_accent_and_tilde` which fixes this.
I do the same. The British PC layout is relatively recent as well, since when I had a Mac in 2013 it didn't exist, and the keyboard layout was the main factor why I ditched it.
Back on Mac now with British PC and it's much less frustrating to use the keyboard. Plenty of other frustrations instead. I'd prefer to be on Linux but the hardware is just too good.
Text selection with arrow keys is missing from the article. When you have select a word, the Shift+Arrow keys work differently between Mac and Windows.
Windows always extends the selection in the direction of the key. But what Mac does I still haven’t managed to figure out. Sometimes it extends, sometimes it shrinks. Feels like a coin toss every time.
For German keyboard layouts, there exists „Erweiterte Tastaturbelegung 1“ standardised in DIN 2137-01:2023-08.
It's available in Windows 11 (since 24H2) and also in Debian Linux for example.
It lets you enter all characters from European alphabets plus some nice extra ones. <https://de.wikipedia.org/wiki/E1_(Tastaturbelegung)> has the details.
Does anyone else have problem scrolling diagonally on a page that's a bit zoomed in(like on HN, you zoom in a little to read the threads)? It just doesn't move smoothly and instead does a staircase shape traversal.
This used to occur on all browsers before upgrading to Tahoe, now it's mostly fixed but still persists on Safari.
It took me a bit after I had to switch to a Macbook, but by now I'm pretty used to switching between Linux and Mac. But the one thing I'm still not used to after a few years is the position of []. It's still a 50/50 whether I hit it on mac
One thing I prefer on Mac keyboards is how heavily the CMD key is use for things I do often and where it is in relation to my thumb. For copying for example, CMD+C is _right there_. It's been a while since I last had a Mac, and my thumb has learned the CTRL+C stretch, but Mac was easier for that.
Didn't know backspace is called delete on Apple products. Explains why one commercial vibecoded project management product used it to delete the whole item I was working on when I missed a text box.
OS-specific abstractions should not leak to web apps under any circumstances.
I've been using Macs for close to a decade and I still constantly forget this little fact. I am reading this very comment I am replying to on a Mac and I still had to do a double take to confirm for myself that it's indeed called 'delete'
Tapping modifiers keys is something you might want to do.
I know many people on smaller keyboards map a single Control tap as ESC.
The only thing special about windows, is that the OS gets to own the Win key completely, which is something not too crazy and I sort of like the idea of ensuring their global shortcuts are always available.
It is crazy because it's a huge waste of relatively ergonomic real estate (win key has a better position than control as you can use your thumb), and the OS isn't competent enough to utilize the whole layer better than what a user/app could do (they couldn't even do window management with Win key good), so its global shortcuts shouldn't always be available
I tried it but this double duty doesn’t work for me. I’m pretty sure I also tried the Caps Lock as Esc but also as Ctrl. Well the main problem was just using the pinky on it so much. I’d rather do a left-up smack on the Esc key with the ring finger.
The crux of the matter is that I want to change my minds and/or not have to think about pressing a key and then bailing out. If it’s just a modifier key then no problem. What’s annoying is the specification “Windows-key”, and Windows OS-ification of it; that the single-key press causes an overwrought compositor animation where you get some gallery of the open applications. That’s even worse.
One thing I never see mentioned, probably because it’s not very common, is that on some languages the Mac has a completely different position for symbol keys! This makes using a Mac keyboard on Windows (or vice-versa) extremely annoying (Linux tends to support the Mac layout as well so it’s fine).
For instance, in Portuguese, the Mac keyboard [1] has the
+ key two keys to the right of 0, and you use shift to input *. Meanwhile, on Windows [2], this key is one row below next to P, with the place it is on Mac occupied by «/». Most of the AltGr keys are also in different spots (particularly { and }), which makes this a major pain if you consistently switch between Windows and Mac.
Frankly I prefer the Mac layout, in part due to the Cmd/Ctrl split, but also because I believe it assigns more meaningful symbols to keys (I have literally never used «/», the internet will tell you that’s how quotations are done in Portuguese but everyone, books included, uses “/”).
I never saw any explanation as to why these differ. Does anyone know of any other languages where this happens? It doesn’t seem to be very common!
French AZERTY on Windows and on Mac have quite some differences in symbol locations, also drives me crazy when switching to my mechanical keyboard.
In AZERTY, the number row works differently. Unshifted gives symbols and commonly-used accented letters like "é" and "à", hold Shift to get a number.
In Windows keyboard, the unshifted "number 8" key corresponds to a "_" while it's a "!" in Mac. The key below Esc on Windows is literally just the superscript 2 for some reason, on Mac it's "@" unshifted, "#" shifted. We also have a key for "μ" and for "§" in Windows.
French AZERTY on Mac doesn't make sense. It doesn't fully map the locations for common shortcuts. Example: cmd + ` on a lot of systems switches windows inside an app (very useful with macOS where cmd + tab circles through apps, not windows). But on the French version, the ` key is somewhere on the right of the 'm' and the shortcut is not replaced with whatever key is above tab.
Another difference I remembered, this time a Microsoft-only idiocy: core Windows and Microsoft (Office) apps TRANSLATE shortcuts! Ctrl+A (“All”) becomes Ctrl+T (“Tudo”) in Notepad if the computer is in Portuguese. Ctrl+S also stops saving and is replaced by Ctrl+G (“Guardar”).
I can see why Microsoft thought this was a good idea, but the problem is that ONLY Microsoft apps do this, so you have two sets of shortcuts to remember. I don’t know a single person who likes this.
I geniunely like typing on current Mac keyboards, but regardless: Apple wouldn’t add them to laptops due to space constraints, and on desktop you’ve got plenty of other great options for Mac-compatible keyboards.
speaking of mac keyboard, I have macbook pro m1 with touch bar and the touch bar blinks like hell and it is been like this for years and it seems like a software bug because when you put flash light on the screen dimming sensor it goes away or atleast blinks less. I reported the bug many times, I checked apple forum lots people has the same issue but no fix yet.
is there anyone who has a solution for this? I dont want update my mac just because of this.
Over the years, I've grown so accustomed to using Mac keyboards on Windows that I swap the positions of the left Alt and Windows keys when using PC keyboards.
> The ⌘ symbol (the "looped square") was chosen by Susan Kare after Steve Jobs decided that the use of the Apple logo in the menu system (where the keyboard shortcuts are displayed) would be an over-use of the logo. Apple's adaptation of the symbol—encoded in Unicode at U+2318—was derived in part from its use in Nordic countries as an indicator of cultural locations and places of interest.
I still call it the Apple key ("omppu" in Finnish, colloquial form of "omena") even though the symbol hasn't matched for a long time. I use it when thinking about shortcuts as well, like a screenshot being shift-omppu-4.
I recently got a Linux desktop after being Mac-only for a long time and using Linux only as a deploy target, and holy shit: the modifier key situation on PCs is so bad.
Control specifically is just a terrible modifier key for common things like edit commands. First, it sits near your pinky instead of your thumb, making chording it with Z, X, C, V, etc., really difficult.
But then... who decided that ctrl-c should be used for both copy and abort??? That's diabolical levels of messed up. In a terminal app ctrl-c aborts, so you need to use shift-ctrl-c to copy, and now you have two shortcuts for the same operation you need to remember based on context, except that in a web-based terminal in Chrome shift-ctrl-c opens "Inspect Element Mode" and now you have no way to copy!
Am I the only one who finds this astoundingly frustrating?
On PC the "original" (Windows 3.0 and earlier) shortcuts for cut/copy/paste were Ctrl-Del, Ctrl-Ins, and Shift-Ins respectively. I believe these were inherited from some older IBM user access standards. And for the most part they still work in Windows, especially in command lines.
Ctrl-X/C/V were originally Macintosh (and maybe Xerox before that?) and then were adopted by Windows in the 3.1 era so Word for Windows would match up better with Word for Mac. But PC not having a Command key, and the Windows key not being a thing yet, they were applied to Control instead. Which of course overlapped with the other major use of Ctrl-C as "interrupt" starting back into early UNIX machines (and adopted by DOS) but... being a graphical environment they apparently didn't consider that important at the time.
Yes, the cut/copy/paste system and its shortcuts were developed at the Xerox PARC LRG as part of Smalltalk-76. They used a Control key.
>and adopted by DOS
DOS inherited it from CP/M by way of the 86-DOS clone that Gates purchased. Kildall used the TOPS-10 while developing PL/M and CP/M and adopted some of its conventions, including control-break.
Historically, of course, copy and paste on a Unix machine was a mouse thing and followed X11 conventions. You selected text with the left mouse button — automatically be saved to the primary clipboard just by virtue of being selected, no key press needed — and the middle mouse button pasted it at the location you clicked.
This is somewhat different to having the two part motion/action of select/control-C and click/control-V. It’s boiled down to just select and middle-click. Separately, you can often use shift-Insert to paste the primary buffer.
I only recently learned that when using the MacOS trackpad with the terminal, you can simulate a middle button click to paste: Highlight some text anywhere in the console, drag it a little and let go. As you pull the text, a little green arrow will pop up and when you let go of the drag (anywhere) it'll paste the text into the prompt, just like middle click does.
Maybe everyone has known this forever and I'm the last to find out, but I thought I'd share as it was a revelation. I middle click all the time when using a mouse, so it was nice to finally discover a replacement while using the trackpad.
Actually, in many cases the opposite. If you have a classical Corner control, it can be used with a part of your palm with less movement, and you finger doesn't contort
"far more natural" would be if you moved pinky up or down. Sideways movements are only natural for your thumb
You're right, but it's fixable: remap Ctrl and Alt permanently with sharpkeys then do a few rebinding fixes in something lik. Autohotkey. Your main modifier should indeed be a thumbs key just like on a Mac
Ctrl-C dumb double function can also be fixed, use it to copy everywhere universally (use a better terminal with an override) and rebind cancel
> who decided that ctrl-c should be used for both copy and abort???
As usual in most of these cases, there wasn't really a single decision, just some historical artifact no one had the care to think about and fix, so it lingers in defaults
That would require moving your right hand (potentially on your mouse) and anyway too far away and not even present on laptop keyboards...
Maybe you could use thumb+Escape for Ctrl+C?
Or thumb+X is simpler - you can't cut anything in the terminal, so "cutting" the current process is a convenient combo and even has some mnemonic potential
You could also have +C copy when text is selected and break otherwise, though that modality can be a bit confusing / error-prone for some
> First, it sits near your pinky instead of your thumb
It's not bad if you have a keyboard (e.g. topre) with control in the caps-lock position (or remap it, which I usually do).
And I also agree that the Lisa/Mac-style command-[zxcv] works really well (particularly if you use a mouse with your right hand.)
MacOS has no problem with both control-c (break) and command-c (copy) - why isn't this common in Linux as well (at least for keyboards with a command or windows key, which seems to be many, many keyboards.)
Nope, it is a crying shame the early Linux/Unix desktop environments copied the Windows/IBM CUA shortcuts and now we have to fight every app and every different method there is for setting keyboard shortcuts to fix it. The Ctrl key was already claimed for use in the terminal for signals and line navigation.
Of (home,end,pgup,pgdown,delete,backspace) the mac has just backspace. And they have just a single control key and such. Clearly the mac keyboard is designed by people that have no idea how to type. There's no "standard windows keyboard" anymore, but even the worst is still worlds better than whatever apple puts out.
I significantly prefer the Mac way of chording Option or Command with arrow keys to achieve those functions. One of the main reasons I can't get used to Linux desktops is that I can't use Opt-arrow to navigate by word and Cmd-arrow to navigate by line. Cmd-arrow makes much more sense than a dedicated Home and End button imho.
I entirely agree. At $NEWJOB, I had a Linux laptop for a bit while a Mac was on backorder.
Not being able to cut/paste easily because every tool used the Control key for something different, especially in the terminal, was infuriating.
Having the command key handle these kinds of GUI-focused interactions, and Control for most of the terminal-centric and text manipulation (Ctrl-A/E for beginning/end of line, from Emacs) makes the system great to work with.
I didn't mind anything else about my foray into Linux as a desktop OS. If we could get a Linux GUI distro that all it did was match the Mac command key paradigm, I think it would make a lot of people happy.
Shift+Insert will let you paste anywhere. It's an IBM thing historically, I believe, and it works pretty much anywhere. Also useful for websites that try to block normal ctrl+v.
I use keyboards with two ctrl and two alt keys. Thinkpads and some Dell laptops have them, and of course there are external keyboards with those keys too.
As a sibling comment notes, Caps Lock as Control helps a lot but it's still not as nice as Command-based shortcuts, both in hand positioning and in terms of shortcut overlap.
> Am I the only one who finds this astoundingly frustrating?
No, you’re not. That’s why I tend to use the archaic shift-Ins and control-Ins shortcuts for copy and paste on Windows. I feel like a dinosaur every time.
Control-c meant cancel for decades before some idiot decided that it ought to mean copy instead.
As for your pinky, just type the chords correctly and you won’t hurt yourself. This means typing the modifier key(s) with the opposite hand instead of the same hand that is typing the letter. So for control-z you are going to type the “z” with your left hand, so use your right hand to type “control”. That’s why the keyboard has every modifier key on both sides.
Ah yes, computing luminary Larry Tesler, what an idiot, working at Xerox PARC. Whoof.
Decades is an exaggeration. It was less than a decade after Digital started using Control-C as a process interrupt in their PDP-10 operating systems (1967) to when Mr Tesler devised his mapping to a copy operation (1974-1976) for Smalltalk-76, and only four years after C was born. CP/M is the much more likely source of widespread usage of control-C as an interrupt, and it was contemporaneous (1974) with Tesler’s mapping.
I come from a different era. Back in the 70s and 80s every home or business computer worked differently (BBC, Aplle ][, Spectrum, Commodore, etc); at Uni we used DOS computers, a Prime mini-computer and some stuff I can't remember; My first job was also using a Prime, and DOS, and various Unix workstations running Motif or OpenWindows. Getting used to a new way of doing things on almost every computer you rocked up to was the normal state of affairs. Kids these days.....
The most [1] annoying difference to me is the Alt/Cmd vs Win/Alt key swaps. In this case, Mac has precedence, and Microsoft decided they would place their new Windows key to the left of Alt.
Also, 10 whippings for whomever at Apple decided to put the Fn/Globe key to the bottom left of laptop keyboards, and move Ctrl over. It's the first thing I swap on a Mac (used to use Karabiner, until macOS finally, years later, decided to implement the setting), and I always trip when using a colleague's laptop. These kids don't respect no traditions!
.. that rant over, I must recognize that Ctrl isn't used as much in GUI apps which prefer Cmd, and only us relatively few terminal junkies care.
[1] second most, perhaps, after swapping Delete & Backspace.
On some Windows layouts (those with the right alt = ctrl+alt trick), right alt is literally mapped to ctrl+alt. Right alt cannot be used to open the menu bar like the left alt can. This is only the case on those keyboards, on other keyboards, the right alt does move focus to the menu bar.
Mac uses cmd+arrows like Windows uses home, end, ctrl+home, ctrl+end. It uses option+arrows to move by word instead of control. (I doubt that what it considers a "word" is identical to Windows either, though many editors do override this anyway.
On some layouts (Polish is one I know of, though there are probably more), shift+backtick is a dead key on Windows and can be used to enter diacritics. Shift+accent followed by c inserts "ć". This is very painful to C++ (and Elixir) programmers, doubly so if you use the cFooManager systems Hungarian notation for class names. This is not the case on the Mac.
Option+letters are semi-dead (zombie?) keys on some layouts. For example, option+u inserts the ¨ accent, but option+u followed by another u combines them, so it inserts an ü. If you follow such a zombie key by a space, the space is swallowed and only the accent is inserted. Polish stupidly copied Option assignments from the US layout, replaced some with Polish diacritics, but never gave us replacements for the removed accents. So, we can now type symbols as useless as Ī or Ŕ, but "el niño" or "résumé" require the key hold and pop-up.
MacOS relies on menu options for things like copy and paste, as well as "Quit" and "Close Window". You should implement them by using the storyboard xCode gives you by default (or meticulously re-creating its included menu bar programmatically if your toolkit of choice doesn't let you do that), and then handle the appropriate selectors in your app if you need to. You should never handle these keyboard shortcuts yourself. MacOS is usually smart enough to figure out when these menu items should be dimmed and when they shouldn't. This doesn't work for custom UI frameworks, but if you use those, you ask for that kind of pain.
On both platforms, IMEs exist. Speakers of Chinese and Japanese want to type too.. Let them type. This involves painful OS integration that a lot of frameworks aren't doing.
On Mac, Option+backspace deletes to the beginning of the current word, but it keeps the space. On Windows (I think???) ctrl+backspace deletes the space.
On Windows, the shortcut to delete something (as in, an item in a list) is the delete key. Shift+delete is "irreversible delete" / "erase", AKA bypassing the recycle bin. On Mac, that's Cmd+Delete (which would be CMd+Backspace from a PC user's perspective).
On Mac, function keys are disabled by default (and perform the work of media keys). You need to combine them with fn to get the original behavior. Some older Macs (including older M-series macs) don't even have function keys at all, they instead have a touch bar. Don't rely on function keys for complex shortcuts.
On Mac, ctrl+arrows and command+space, while not being "reserved" in the traditional sense of the word, are often taken over by system functionality and never given to the app in the first place.
The dead accent key feature is super handy - it means I never have to leave the UK English layout to type in Portuguese. I don't know if that's available because I use the PC variant of the layout, though.
I wish i had mac hardware with a fully supported Linux OS. There are some options but most have bad hardware. I kind of wish Apple would just "unlock" its hardware for other options like Linux.
I have been helping someone who has little experience with Windows or Mac, but used DOS for years ( until pretty recently ) and I've set them up with a simple Debian Linux running XFCE4 as the desktop. I've found that I have to teach them and also document a lot of basic computer idioms -- Control-C / X / A / V to copy, cut, select all, paste; but also more basic things, like the fact there are two pointers on the screen -- one for the mouse and one for the keyboard -- if you slide the mouse pointer to a specific point and press a keyboard key, the new key will not appear where the arrow is, it will appear where the text cursor is.
A big one was tabs. I had to get a couple of manilla folders and show them the actual tabs, and hold it up next to the browser with several tabs, and suddenly it snapped with them what the interface was trying to represent.
Control-A will select all of a web page, unless you are in the text entry box of a form, then it selects just the things in that text entry box.
I started writing this up in a little manual, it got to a dozen pages fast, and I haven't put very much in it.
If anyone knows of a place where some portion of all of this is written down, post a link !
At one point he said "You need to move the mouse up" and one of the participants actually lifted the mouse physically from the desk - which was perfectly correct for someone not being used to computers.
I always remember this when I think "isn't this obvious?" with regards to usage patterns on computers.
I corrected him and went on my rounds. I remember that a bank manager was the best of the batch. By the time I circled back to my philosophy friend, he quietly changed "exit()" back to "exist()" and the program was not compiling again! This anecdote stayed in my mind.
Some used a photocopier.
I disagree.
Even someone with no experience with computers understands, generally speaking, that the mouse is tracking the surface of the desk somehow. I have had this conversation many times (or did, back in the 1990s when mice were more novel for most people). Nobody picked it up.
The ones who do in these anecdotes are, IMO, examples of the sort of people who absolutely shut their brains off in protest when asked to work with new tech. I have been blessed in that I have only very, very rarely been asked to work with or even know such people.
Out of curiosity: were they unfamiliar with the mouse, or were there programs that used a single cursor for both the keyboard and mouse? (I am aware that many text mode programs used a block for both cursors, but haven't seen a program where the two functions were combined.)
I had no idea using unix vs windows cursor movement was even an option, because linux never picks the correct method, Still have no clue how it is set(a gtk option? but qt apps are set the same.) But salutes to whatever obsd porter picked it, really made my day.
They are defined in /System/Library/Frameworks/AppKit.framework/Resources/StandardKeyBinding.dict. You can create ~/Library/KeyBindings/DefaultKeyBinding.dict to augment or override those.
Anything built on AppKit that uses the standard text system (NSTextView, NSTextField, and the field editors that back them) supports those bindings “for free”.
For non-native apps, Karabiner Elements⁽¹⁾ is the answer, using a config like this⁽²⁾.
⁽¹⁾ https://karabiner-elements.pqrs.org/
⁽²⁾ https://github.com/pdelfino/karabiner-config
There used to be an obscure internal GTK setting to properly separate control plane from command plane like on (then named) Mac OS X but IIRC it's long gone / hardcoded to only GTK on macOS.
EDIT: Found it, GTK up to 3 had proper <Primary> vs <Control>. In what I would consider to be a fatal regression, GTK 4 just aliases <Control> and <Primary>, leaving the apps to do the work.
https://gaphor.org/2022/12/10/gtk4-macos-keybindings/
I always find this curious, is readline implemented at the hardware level or something? There’s just no effing way that was a priority ticket on Microsoft Teams given all the obnoxious weirdness of their chat text field.
And bizarrely, ctrl+k, ctrl+w, and ctrl+e are more seldom. Maybe 50-50 chance for those. But trusty ctrl+a is always there.
I tried for a week to get used to the unfamiliar key bindings for text input, but then I gave up—I'm a vim user after all!—and found a system setting to use the bindings I am more familiar with. This was picked up by many applications, but notably _not_ by the Microsoft suite, which appears to have the default macOS bindings hard coded...
Their misunderstanding of not being able to hover their cursor over something and interact using the keyboard honestly has me wondering why I thought the real way was intuitive, their logic there makes sense
The year is 2026. Who the heck has been using DOS (!?) until "pretty recently"? On what machine?
They are sold a few years ago, new owner just needs a good (and huge) location in the city, if they continued, nothing would change for people working there. They saw Windows as something just for minesweeper and solitaire, nothing else.
This is perhaps an indirect confirmation that The Winds of Winter is back on track.
Not "DOS" in the classical sense, but a good corporate travel agent will probably spend the majority of their day in Amadeus or Sabre on a terminal emulator app - and be much, MUCH faster than clicking around in web portals.
But that's quite different from "someone using only DOS up to only 2026".
This is traumatizing for me. I tried to switch to a mac for home use and failed because of keyboard handling. Using Polish diacritics (made with right alt) wasn't obvious at first. I was able to switch keyboard settings to mimic Linux/Windows, but it's just not there. Control and Command confusion haunts me. I dropped the platform because of this and know a few people who stayed on iphones, but also dropped Macs because of keyboard.
I once tried to "find myself" on linkedin search bar on someone else's Mac. I though "I got this, I'm a mac user now!" and managed to close the browser tab and open some random programs...
I admire people who jump between those platforms. Even more for languages that don't have standardized alphabet mappings, like Bulgarian (it seems they don't have consensus there).
You can then left_command -> right_option, then use that "right_option" key in Raycast (to get PowerToys Command Palette fonctionality) and in AltTab (Windows-like multitasking).
If you use Raycast, you can easily assign the Windows key+. to emojis and Windows key+V to the clipboard history, like on Windows. If you don't, you can also do it with the system tools in Karabiner.
Moving between words was probably the thing that frustrated me the most, because on Mac it uses Option instead of Command, for some reason. Cmd+Left/Right -> Option+Left/Right gives you Windows-like word jump. Cmd+Backspace -> Option+Backspace allows you to remove a word using the Ctrl+Backspace keys, like on Windows. Same thing with Cmd+DeleteForward -> Option+DeleteForward. Unlike DefaultKeyBinding.dict modifications, which people online tend to suggest, it works in all apps (including Electron ones).
In my Chromium browser (Edge), I like to remap Cmd+H -> Cmd+Y (history), Cmd+J -> Cmd+Option+L (downloads), and Cmd+Tab -> Ctrl+Tab (tab switching). I'm not sure why Chromium uses such vastly different shortcuts on the two platforms.
For the latter, that only apply when your browser is open, I suggest creating the "Complex Modifications" rules using AI, because formatting can be tricky.
Once set up, it's easy to transfer rules between computers by exporting your settings in Karabiner, so you only have to do it once.
I still think that, if you're switching permanently, it would be better to relearn everything, because these patches can make it confusing to learn new shortcuts. But it's been a lifesaver for me, since I switch between Windows and Mac every day.
I had the same issue when I first started using a Mac decades ago (coming from being a Linux and Windows user), would get confused with Cmd and default to Ctrl, not understanding how to use diacritics, etc. A few weeks to a couple of months later and it was fine.
Nowadays I very much miss macOS diacritics shortcuts when using Windows, I only have a Windows PC for games with a Swedish/English keyboard but need to write in Portuguese sometimes, I have no idea how to use diacritics on Win11 while my keyboard is set to English, and much prefer the macOS way with Option + [N | E | I | C] (for ˜, ´, ˆ, ç) using any keyboard language, it just works. On Windows I need to change the whole keyboard language to be able to access diacritics easily, no shortcuts such as those.
However, when I still used Windows 11, I remember there being a variant of US keyboard layout built into the system that included Mac-like way of entering international diacritics. I no longer have access to a machine with Windows, but a quick Google search suggests United States – International might be what you're looking for.
It's quite a good system: you press compose-character and then two letters to be combined. E.g. CC/o/" gives ö and CC/a/o gives å and so on. If you don't know the exact combination, you can usually guess within one or two attempts e.g. just now trying to get ç I guessed CC/c/s (š) and then CC/c/c (č) before getting it right with CC/c/,
Apropos of Swedish keyboards, though, when a Mac is inflicted on me, the horrible contortions necessary to get all the usual programming bracket symbols ({[]}) are infuriating. They're a lot less annoying on a Swedish PC keyboard.
It was only when I moved to overriding CapsLock that I installed Karabiner.
Just curious why compose-character combo for å is a/o though, it would make more sense to me to be a/a.
> Apropos of Swedish keyboards, though, when a Mac is inflicted on me, the horrible contortions necessary to get all the usual programming bracket symbols ({[]}) are infuriating.
Absolutely agree, I never use the Swedish software layout even on keyboards which are physically using a Swedish layout, it's maddening finding the {[]}-_+=@ chars...
Yep, but I think it's intended to be a visual mnemonic. å looks like a tiny 'o' over the top of an 'a' even though that's not the letter combination it originated with.
> it's maddening finding the {[]}-_+=@ chars...
The series of RSI inducing vulcan neck pinches required to write C-like languages on a Nordic Mac layout drives me a bit mad, but I do have it in my body memory now when needs must!
I toy with the idea of designing my own 40%-ish keyboard just so I only have myself to blame for bad layout :)
But I did get used to the navigation and basic shortcuts after a while. Using the terminal/keyboard/IDE shortcuts (which I can set up myself) for most of the work helps a lot.
Finder is still terrible though.
A lot of the Finder shortcuts work in the save / open dialogs in apps, although they broke some of the ergonomics of those dialogs years back.
https://github.com/ivancuric/mac-hr-sane-layout
If you've ever made the jump from PC to Mac (or vice versa) at work or home, you're painfully aware that there are very real costs of switching platforms in terms of lost knowledge and productivity. In addition to flushing years of accumulated knowledge down the toilet — goodbye Outlook-Teams-OneDrive-SharePoint-Excel-Word-PowerPoint-VBA, hello GMail-Workspace-GDrive-Sheets-Docs-Slides — there's also the matter of a thousand UI and other "paper cuts" to contend with ("Why are you looking for a 'prt sc' key," condescendingly replies a Mac aficionado in response to a question from a former Windows user, "when Shift+Command+3 is so intuitive?").
The Mac boosters here would be hilariously quaint if it wasn't so frustrating. Docker images that only work on macOS Docker and break on regular Linux. Quips like "Mac is so much more reliable, just use a Mac for Docker!" that I think are genuine opinion rather than a smug joke.
Between this, AI, and all the other brain rot trends, working in tech is so depressing these days.
I make this "jump" about 20 times per day. I have iOS, MacOS and 2 windows machines at the moment. Very frequently I will RDP into the windows machines from the MacBook.
> goodbye Outlook-Teams-OneDrive-SharePoint-Excel-Word-PowerPoint-VBA
https://www.microsoft.com/en-us/microsoft-365/mac/microsoft-...
Maybe it used to be hard to do this and I just got used to it. I have made zero attempts to normalize anything.
Beginners have to learn every system from scratch, in the limited time they spend on the computer.
I've used a Windows PC my entire life. 35 years of PC.
I use my MBP M2 Pro when I travel, and for about 6 weeks every summer, and it's like pouring lemon juice into a paper cut the entire time.
Specifically, my concerns are around this exact matter: I have such muscle memory attached to, say, slamming my pinky across L-Ctrl+L-Shift+left arrow in order to quickly select just the previous word from the cursor.
This is something I do... I don't know, at least once a paragraph, as I very very quickly type and then realize I've introduced some basic typo that I need to nuke the previous word to address.
Doing this on Mac keyboards is Shift + Option + Left Arrow and... it's hell. It's absolute hell. Mashing that extreme corner shortcut with my pinkie is so baked in that there's just... no reasonable way for me to reprogram my brain to do that on a Mac.
Similarly, I have a stroke every time I try to mentally remap what things use control and what uses command. And while I could potentially remap the fn key on an MBP keyboard, I tend to use my Logitech K800 on both systems, so instead try to remap control to ALSO be command to basically get me as close to muscle memory as possible for things that need the command + shift. Since control is relatively rarely used, I think I just remapped it to caps lock. Though boy does that screw me in tmux.
Either way, when I'm typing extremely fast, being able to reliably navigate the caret and jumping around words, whole lines, etc. is just something I simply cannot get anywhere close to on a Mac and I die a tiny death every time I try.
Some nice things had been lost, some nice things had been found. Maybe it's also because OSX was also somewhat of a downgrade from OS8/OS9 in terms of user experience. Especially, Finder became a lot worse. So, people didn't feel very motivated to upgrade, and it made the switch easier... But, overall, there was very little struggle, the time we'd spend setting up the newspaper / magazine for print didn't really change.
Well... now, when I think about it, most of us used PCs at home. So, maybe it's not a fair comparison. But, even people who had Macs as their home / personal computers didn't seem to have any issue with the switch.
I think, some people kept the keyboards that came with G3/G4 (the clear heavy plastic ones with black key caps). They could be used with PCs. People didn't keep them to preserve the Mac-style layout (it wouldn't work anyways iirc), they just liked the quality of the physical product and accepted that some keys won't work the same way they did on a Mac.
Even though you could connect Mac mouse to a PC, I don't think anyone used that.
Technically DOS could have had "backspace" (delete the character BEFORE the cursor), "delete" (delete the character on/under the cursor), and "forward delete" (delete the next character AFTER the cursor).
Also Option and the right and left arrows to move from one word to the next. I don't really use this one much though
..while Windows is all over the place. Like why the heck is Alt+F4 used for quitting an app?? What does 4 stand for here? Death in Japanese and Chinese!?
Yeah consistency is great, similarly cmd+t closes a tab, wait cmd+w closes a tab not a window. and cmd+w in vlc does not close vlc, cmd+w in finder does close the window.
> similarly cmd+t closes a tab, wait cmd+w closes a tab not a window.
Because tabs are windows, and most multi-window-capable apps have the option to use tabs instead.
> and cmd+w in vlc does not close vlc
Again, in multi-window apps, closing the last window does not necessarily quit the app, but it's optional.
⌘R Reload in Safari; reply in Mail; reveal an alias's original in Finder
⌘L Address bar in browsers; message filter in Mail; clear to previous mark in Terminal.
⌘I File info in Finder; italics in text; inspector in Terminal.
I can keep going. This is not to say windows/osx is worse or better, just that claims of consistency are not suitable on either
What kind of consistency did you expect across Mail App and Safari? How do you "Reply" in browsers?
Alt+F4 through Alt+F9 are for Window Menu operations, like minimize, max. etc. Some besides Alt+F4:Close still work on older window managers, I remember SGI supported all of them.
Newer ones tend to hide or even disable the whole menu! Even Windows as it is further lobotomized.
The shift+insert,delete etc. are from MSDOS as far as I used them – they might have been copied from a previous OS.
Apple commands are not always Command+Something. Go ahead, try to reopen the last closed tab on anything you're using, with the keyboard. Whooops, you pressed three keys. Also try to take a partial screen shot or record the screen. Hey, buddy, what the heck? Why did you press 4 and 5? What do 4 and 5 even mean?
The command-shift shortcuts (function keys as they were called) were added in the 80's as such:
Command-Shift-1: Eject internal floppy
Command-Shift-2: Eject external floppy
Command-Shift-3: Take screenshot
In the System 7 era in the mid-90's, Command-Shift-4 to select an area to take a screenshot of was added.
Back then you could also install FKEY code resources into the system file to add custom ones, there was a small ecosystem of freeware/shareware function keys with useful shortcuts people would install.
> not always Command+Something. Go ahead, try to reopen the last closed tab on anything you're using, with the keyboard. Whooops, you pressed three keys.
Not always JUST Command duh. It still includes Command champ; the rest are modifiers.
I mean just ask any AI to list out all the common shortcuts for macOS and for Windows, then see which is more consistent.
> partial screen shot or record the screen ... Why did you press 4 and 5? What do 4 and 5 even mean?
4 alludes to the 4 corners of a rectangle, and 5 includes the time dimension, of course :)
I'm not an Apple person at all, but this is one of the hills I die on. The "Enter" key is for entering data, submitting a field, etc. The "Return" key is for returning the carriage, i.e. starting a new line. Importantly, those two are different functions! The only keys that exist twice on the keyboard are modifier keys (Ctrl, Shift, sometimes Super and Alt). The Return or Enter keys do not need to exist twice. Clearly these are meant to be two different functions, because they are two different keys on the keyboard.
To my wife's annoyance, I teach my children the correct names for these keys.
Line feed is the command that is incrementing to the new line.
Those two commands almost always run together so it quickly became possible to invoke with a single CRLF command (in ancient computer times)
I wouldn't take "the standard 104 keyboard layout" as a respectable design.
- If the modifier keys exist twice, then why aren't they placed symmetrically?
- Most users use a mouse with the right hand; yet the numpad is placed on the right side of the keyboard (which means it's even further away). e.g. placing keyboard in front of you in the screen then means the mouse needs to be way off centre.
- That the letters remain asymmetrical shows adherence to tradition/familiarity over improving a good design.
- The spacebar doesn't need to be >6x the size of other keys.
- Caps Lock can be useful but isn't significant enough to be worth putting where it is.
I mean. I can agree with distinguishing "Return" and "Enter". But I wouldn't refer to the typical keyboard layout as if it's a well thought out design.
> The Return or Enter keys do not need to exist twice
I use the doubled enter key much more than i have ever used the secondary modifier keys.
It is very convenient for quickly entering numeric only data with one hand, especially as it is the hand that would naturally use the big enter key.
Dual booting between a MacOS and Linux is a painful process of manual keyboard and shorcut overrides to get the linux side somewhat to the (better) mac way of doing this.
When I want to type an @ on a Windows machine, I accidentally press Windows-L and lock it. For Windows users, when they use a Mac, they might be tempted to press AltGr-Q, which quits the foreground application.
Not even mentioning the general well thought out and more logical key-combinations.
The strangest key for the switch was return for file rename… I now miss it on every other system that hasn't mapped it like this.
The cmd key was a thin key of full width below the space bar. https://deskthority.net/viewtopic.php?t=12260
Although having the Help key where ⌘ is now was not that useful.
Genuinely find it better ergonomically because it’s closer to where all the keys it’s pressed with are.
Far corner ctrl makes me use my pinky and splay my hand for it while beside space ctrl feels more natural for a thumb
Also Pinky finger to crouch in Medal of Honor, etc :-)
Control has always been in the bottom left corner (until certain laptops started putting Fn there)
If you touch type, you hold your 4 fingers on ASDF. If you want to press Ctrl+C, you move your pinky to Ctrl and press C with the index finger or middle finger.
On Macintosh, you have to hold your pinky much too close to the index finger to press Command+C which are very close.
If, instead, you use thumb and index that also puts the thumb in an awkward position because you have to cross the fingers (Command is to the left of C)
What fingers do you use?
The "Start" or Windows key is the same as the "Command" key
"Alt" is the same key as "Option"
This is how every keyboard I've ever used has worked. This is usually how they work when you plug a PC keyboard into a Mac or vice-versa.
Otherwise it would be really confusing when you switch from your external keyboard to the laptop keyboard.
> On a Mac, in simple input fields, ↑ and ↓ jumps to the beginning and end [...] Windows doesn’t have this convention
IIRC it worked for me on Windows (and Linux :-) as well!
I do prefer ⌘←→ as it’s more consistent. Also, ⌥←→ jumps one word back/forward on Mac, the Windows equivalient being ⌃←→.
> On Windows, [refresh is] typically F5, although some browsers now support Ctrl+R, too
Have always supported as far as I can remember :) F5 works on Mac in Firefox (and I think Chromium), but not in Safari.
> On both platforms, Fn+↑↓ does PgUp/ PgDn, and Fn+←→ does Home/End.
This will vary a lot depending on the manufacturer. ThinkPad T420 and other models from that era use those for media keys (which makes sense, they do have physical Home/End/PgUp/Dn keys).
---
Finally, a suggestion to fellow Linux users: try Mac keybindings, it’s amazing (especially if you’re e.g. running Asahi on a Macbook). Not all apps will be happy about this, but at least the KDE ones will generally follow the keybindings you set in the system settings.
> I always get a bit nervous when someone tells me that in their country, you can press the elevator button again to unset it.
The way I’ve seen this solved in a lot of countries across SEA is that you unset the elevator button by double-pressing it. It’s not intuitive, and I’ve only discovered it by accident, but it’s deterministic and idempotent: one gesture sets the button, the other unsets it.
[1]: https://unsung.aresluna.org/deterministic-vs-idempotent/
Just looked down on my windows keyboard and yes, the return key (the one above the right shift key) says "enter". That did not use to be the case. The return key used to say return and the tall key next to 3 and the numpad used to be the only enter key.
When did that change in PC land? I remember reading nerdy articles about the difference between return and enter.
But terminals and UNIX machines were more likely to use "Return", e.g. looking at a DEC VT100 or Sun SPARCstation keyboard.
edit: looks like most of the 8-bit machines like Commodore, Atari also used Return. So Enter was mostly an IBM thing.
[1] https://en.wikipedia.org/wiki/PowerBook_G3#/media/File:Apple...
I have spent literally several minutes scanning this keyboard for a physical Enter (as opposed to Return) and have no idea what the author is talking about.
Well, I say "is used", but nothing in Windows is consistent anymore. Especially since web browsers started disrespecting the OS shortcuts. Now it seems like every application follows the web browser UI conventions instead of OS ones.
So I grew up using DOS and these were pretty universal across edit/qbasic/word as well as many other third party apps. Not being able to Shift-Insert paste took my brain literally months to get used to when I switched to Mac like twenty years ago.
When I rarely find myself in Windows the muscle memory comes right back.
I subsequently have to set my Mac keyboard layout to PC to fix backticks and remove that key that is never used, and rely on my touch typing. It does also mean that no one will ever try to type on my laptop.
Eventually I settled on Karabiner Elements, an app that lets you create a simple modification specifically to target the Mac internal keyboard where you can map `non_us_backslash` (that strange unused key) to `grave_accent_and_tilde` which fixes this.
Back on Mac now with British PC and it's much less frustrating to use the keyboard. Plenty of other frustrations instead. I'd prefer to be on Linux but the hardware is just too good.
Windows always extends the selection in the direction of the key. But what Mac does I still haven’t managed to figure out. Sometimes it extends, sometimes it shrinks. Feels like a coin toss every time.
That's me! readline everywhere by default is fantastic and should be immediately copied by every Linux DE!
One note:
> Access to extra characters
For German keyboard layouts, there exists „Erweiterte Tastaturbelegung 1“ standardised in DIN 2137-01:2023-08. It's available in Windows 11 (since 24H2) and also in Debian Linux for example. It lets you enter all characters from European alphabets plus some nice extra ones. <https://de.wikipedia.org/wiki/E1_(Tastaturbelegung)> has the details.
Does anyone else have problem scrolling diagonally on a page that's a bit zoomed in(like on HN, you zoom in a little to read the threads)? It just doesn't move smoothly and instead does a staircase shape traversal.
This used to occur on all browsers before upgrading to Tahoe, now it's mostly fixed but still persists on Safari.
For reference: https://www.reddit.com/r/MacOS/comments/1hh5yjo/diagonal_tra...
Shift inset is handy when ssh-ing intobabtemoyr machine with Python windows.
OS-specific abstractions should not leak to web apps under any circumstances.
I know many people on smaller keyboards map a single Control tap as ESC.
The only thing special about windows, is that the OS gets to own the Win key completely, which is something not too crazy and I sort of like the idea of ensuring their global shortcuts are always available.
That’s great. Now, why aren’t cut, copy, and paste one of these global shortcuts that are always available?
The crux of the matter is that I want to change my minds and/or not have to think about pressing a key and then bailing out. If it’s just a modifier key then no problem. What’s annoying is the specification “Windows-key”, and Windows OS-ification of it; that the single-key press causes an overwrought compositor animation where you get some gallery of the open applications. That’s even worse.
Those shortcuts come from Emacs and shells adopted them.
For instance, in Portuguese, the Mac keyboard [1] has the + key two keys to the right of 0, and you use shift to input *. Meanwhile, on Windows [2], this key is one row below next to P, with the place it is on Mac occupied by «/». Most of the AltGr keys are also in different spots (particularly { and }), which makes this a major pain if you consistently switch between Windows and Mac.
Frankly I prefer the Mac layout, in part due to the Cmd/Ctrl split, but also because I believe it assigns more meaningful symbols to keys (I have literally never used «/», the internet will tell you that’s how quotations are done in Portuguese but everyone, books included, uses “/”).
I never saw any explanation as to why these differ. Does anyone know of any other languages where this happens? It doesn’t seem to be very common!
[1]: https://store.storeimages.cdn-apple.com/1/as-images.apple.co... [2]: https://upload.wikimedia.org/wikipedia/commons/2/2c/KB_Portu...
In AZERTY, the number row works differently. Unshifted gives symbols and commonly-used accented letters like "é" and "à", hold Shift to get a number.
In Windows keyboard, the unshifted "number 8" key corresponds to a "_" while it's a "!" in Mac. The key below Esc on Windows is literally just the superscript 2 for some reason, on Mac it's "@" unshifted, "#" shifted. We also have a key for "μ" and for "§" in Windows.
I can see why Microsoft thought this was a good idea, but the problem is that ONLY Microsoft apps do this, so you have two sets of shortcuts to remember. I don’t know a single person who likes this.
https://en.wikipedia.org/wiki/Command_key
> The ⌘ symbol (the "looped square") was chosen by Susan Kare after Steve Jobs decided that the use of the Apple logo in the menu system (where the keyboard shortcuts are displayed) would be an over-use of the logo. Apple's adaptation of the symbol—encoded in Unicode at U+2318—was derived in part from its use in Nordic countries as an indicator of cultural locations and places of interest.
More here: https://www.core77.com/posts/97914/Debunking-a-Myth-Apples-C...
Control specifically is just a terrible modifier key for common things like edit commands. First, it sits near your pinky instead of your thumb, making chording it with Z, X, C, V, etc., really difficult.
But then... who decided that ctrl-c should be used for both copy and abort??? That's diabolical levels of messed up. In a terminal app ctrl-c aborts, so you need to use shift-ctrl-c to copy, and now you have two shortcuts for the same operation you need to remember based on context, except that in a web-based terminal in Chrome shift-ctrl-c opens "Inspect Element Mode" and now you have no way to copy!
Am I the only one who finds this astoundingly frustrating?
Ctrl-X/C/V were originally Macintosh (and maybe Xerox before that?) and then were adopted by Windows in the 3.1 era so Word for Windows would match up better with Word for Mac. But PC not having a Command key, and the Windows key not being a thing yet, they were applied to Control instead. Which of course overlapped with the other major use of Ctrl-C as "interrupt" starting back into early UNIX machines (and adopted by DOS) but... being a graphical environment they apparently didn't consider that important at the time.
Yes, the cut/copy/paste system and its shortcuts were developed at the Xerox PARC LRG as part of Smalltalk-76. They used a Control key.
>and adopted by DOS
DOS inherited it from CP/M by way of the 86-DOS clone that Gates purchased. Kildall used the TOPS-10 while developing PL/M and CP/M and adopted some of its conventions, including control-break.
Historically, of course, copy and paste on a Unix machine was a mouse thing and followed X11 conventions. You selected text with the left mouse button — automatically be saved to the primary clipboard just by virtue of being selected, no key press needed — and the middle mouse button pasted it at the location you clicked.
This is somewhat different to having the two part motion/action of select/control-C and click/control-V. It’s boiled down to just select and middle-click. Separately, you can often use shift-Insert to paste the primary buffer.
Maybe everyone has known this forever and I'm the last to find out, but I thought I'd share as it was a revelation. I middle click all the time when using a mouse, so it was nice to finally discover a replacement while using the trackpad.
Ctrl-C doing different things come from different os/software lineages
"far more natural" would be if you moved pinky up or down. Sideways movements are only natural for your thumb
Ctrl-C dumb double function can also be fixed, use it to copy everywhere universally (use a better terminal with an override) and rebind cancel
> who decided that ctrl-c should be used for both copy and abort???
As usual in most of these cases, there wasn't really a single decision, just some historical artifact no one had the care to think about and fix, so it lingers in defaults
Maybe you could use thumb+Escape for Ctrl+C?
Or thumb+X is simpler - you can't cut anything in the terminal, so "cutting" the current process is a convenient combo and even has some mnemonic potential
You could also have +C copy when text is selected and break otherwise, though that modality can be a bit confusing / error-prone for some
It's not bad if you have a keyboard (e.g. topre) with control in the caps-lock position (or remap it, which I usually do).
And I also agree that the Lisa/Mac-style command-[zxcv] works really well (particularly if you use a mouse with your right hand.)
MacOS has no problem with both control-c (break) and command-c (copy) - why isn't this common in Linux as well (at least for keyboards with a command or windows key, which seems to be many, many keyboards.)
Toshy can help but it's still not a perfect fix.
First claim has no priority over better claim. Designs can and should improve
https://www.apple.com/shop/product/mxcj3ll/a/magic-keyboard-...
I see on that Apple keyboard:
• two control keys
• two option keys
• two command keys
• delete (aka backspace)
• forward delete (aka delete)
• home
• end
• page up
• page down
Not being able to cut/paste easily because every tool used the Control key for something different, especially in the terminal, was infuriating.
Having the command key handle these kinds of GUI-focused interactions, and Control for most of the terminal-centric and text manipulation (Ctrl-A/E for beginning/end of line, from Emacs) makes the system great to work with.
I didn't mind anything else about my foray into Linux as a desktop OS. If we could get a Linux GUI distro that all it did was match the Mac command key paradigm, I think it would make a lot of people happy.
As a sibling comment notes, Caps Lock as Control helps a lot but it's still not as nice as Command-based shortcuts, both in hand positioning and in terms of shortcut overlap.
No, you’re not. That’s why I tend to use the archaic shift-Ins and control-Ins shortcuts for copy and paste on Windows. I feel like a dinosaur every time.
On Linux I just deal with it and curse a lot.
As for your pinky, just type the chords correctly and you won’t hurt yourself. This means typing the modifier key(s) with the opposite hand instead of the same hand that is typing the letter. So for control-z you are going to type the “z” with your left hand, so use your right hand to type “control”. That’s why the keyboard has every modifier key on both sides.
Gee thanks.
I like to have my right hand on a mouse or trackpad, so two handed chords are much less convenient.
Macs manage to make one-handed chords for copy and paste ergonomic, but on a PC it's user error?
Cmd-C is not any more ergonomic than Ctrl-C. You are only speaking from position of habit. Pressing modifier with tucked in thumb is not great for it.
If someone is concerned about ergonomics, they should buy ergonomic keyboard. Standard layouts are crap.
Decades is an exaggeration. It was less than a decade after Digital started using Control-C as a process interrupt in their PDP-10 operating systems (1967) to when Mr Tesler devised his mapping to a copy operation (1974-1976) for Smalltalk-76, and only four years after C was born. CP/M is the much more likely source of widespread usage of control-C as an interrupt, and it was contemporaneous (1974) with Tesler’s mapping.
Also, 10 whippings for whomever at Apple decided to put the Fn/Globe key to the bottom left of laptop keyboards, and move Ctrl over. It's the first thing I swap on a Mac (used to use Karabiner, until macOS finally, years later, decided to implement the setting), and I always trip when using a colleague's laptop. These kids don't respect no traditions!
.. that rant over, I must recognize that Ctrl isn't used as much in GUI apps which prefer Cmd, and only us relatively few terminal junkies care.
[1] second most, perhaps, after swapping Delete & Backspace.
Regarding Fn even Thinkpad has now changed it so Ctrl is in the corner.
On some Windows layouts (those with the right alt = ctrl+alt trick), right alt is literally mapped to ctrl+alt. Right alt cannot be used to open the menu bar like the left alt can. This is only the case on those keyboards, on other keyboards, the right alt does move focus to the menu bar.
Mac uses cmd+arrows like Windows uses home, end, ctrl+home, ctrl+end. It uses option+arrows to move by word instead of control. (I doubt that what it considers a "word" is identical to Windows either, though many editors do override this anyway.
On some layouts (Polish is one I know of, though there are probably more), shift+backtick is a dead key on Windows and can be used to enter diacritics. Shift+accent followed by c inserts "ć". This is very painful to C++ (and Elixir) programmers, doubly so if you use the cFooManager systems Hungarian notation for class names. This is not the case on the Mac.
Option+letters are semi-dead (zombie?) keys on some layouts. For example, option+u inserts the ¨ accent, but option+u followed by another u combines them, so it inserts an ü. If you follow such a zombie key by a space, the space is swallowed and only the accent is inserted. Polish stupidly copied Option assignments from the US layout, replaced some with Polish diacritics, but never gave us replacements for the removed accents. So, we can now type symbols as useless as Ī or Ŕ, but "el niño" or "résumé" require the key hold and pop-up.
MacOS relies on menu options for things like copy and paste, as well as "Quit" and "Close Window". You should implement them by using the storyboard xCode gives you by default (or meticulously re-creating its included menu bar programmatically if your toolkit of choice doesn't let you do that), and then handle the appropriate selectors in your app if you need to. You should never handle these keyboard shortcuts yourself. MacOS is usually smart enough to figure out when these menu items should be dimmed and when they shouldn't. This doesn't work for custom UI frameworks, but if you use those, you ask for that kind of pain.
On both platforms, IMEs exist. Speakers of Chinese and Japanese want to type too.. Let them type. This involves painful OS integration that a lot of frameworks aren't doing.
On Mac, Option+backspace deletes to the beginning of the current word, but it keeps the space. On Windows (I think???) ctrl+backspace deletes the space.
On Windows, the shortcut to delete something (as in, an item in a list) is the delete key. Shift+delete is "irreversible delete" / "erase", AKA bypassing the recycle bin. On Mac, that's Cmd+Delete (which would be CMd+Backspace from a PC user's perspective).
On Mac, function keys are disabled by default (and perform the work of media keys). You need to combine them with fn to get the original behavior. Some older Macs (including older M-series macs) don't even have function keys at all, they instead have a touch bar. Don't rely on function keys for complex shortcuts.
On Mac, ctrl+arrows and command+space, while not being "reserved" in the traditional sense of the word, are often taken over by system functionality and never given to the app in the first place.